Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Microsoft Games Systems (https://www.cableforum.uk/board/forumdisplay.php?f=15)
-   -   Port Forwarding On New 50mb Netgear Router (https://www.cableforum.uk/board/showthread.php?t=33673425)

mikafire 27-12-2010 23:00

Port Forwarding On New 50mb Netgear Router
 
Hi All, I've just had the new 50mb service installed and was wondering if anyone on here knows what settings I need to be putting in to open the ports for xbox live?

I currently have 4 xboxes running on my network which can range from open, moderate to strict depending what I turn on first!! Am I able to have them all on with an open Nat or is this not possible?

Currently I have given each xbox a static IP and I have even put one in the DMZ.

Any help is much appreciated

mjpartyboy 28-12-2010 14:04

Re: Port Forwarding On New 50mb Netgear Router
 
Have a look at this post I wrote in another thread:

http://www.cableforum.co.uk/board/87...l#post35129443

I'm not advising to change your firmware, but this post and the following link should help to explain the situation:

http://jakebillo.com/two-xboxes-one-...-wrt-or-tomato

mjpartyboy 29-12-2010 13:44

Re: Port Forwarding On New 50mb Netgear Router
 
Here are the Xbox Live ports:

- Port 88 (UDP)
- Port 3074 (UDP and TCP)
- Port 53 (UDP and TCP)
- Port 80 (TCP)

http://support.microsoft.com/kb/908874

Port forwarding can only open them up to one console at a time, so it will not resolve your multiple consoles NAT problem. I still advise reading the links in my last post.

mikafire 31-12-2010 21:57

Re: Port Forwarding On New 50mb Netgear Router
 
Thanks for the info mj at least I understand whats happening now;)

The VM router is a netgear but also has the modem combined:confused: The device also has it's own custom f/w installed. I can enable UPnP but this doesn't seem to help!!

I'm looking for settings that I can just put in using the f/w already on the device. Anyone else got the same set up as me?

mjpartyboy 01-01-2011 12:30

Re: Port Forwarding On New 50mb Netgear Router
 
It might not be possible to achieve an open NAT on all the 360s using the VM device with their custom firmware. Some firmware just can't handle this operation for multiple devices.

Here is the list of MS certified Live compatible hardware and firmware, which allow multiple consoles on Live at the same time:

Quote:

All of the network hardware in the following lists works with multiple Xbox 360 consoles connected at the same time. If you get a NAT error or cannot connect to Xbox LIVE, try using our Xbox LIVE Connect Solution.
http://support.xbox.com/en-us/pages/...xbox-live.aspx

mjpartyboy 11-01-2011 20:45

Re: Port Forwarding On New 50mb Netgear Router
 
I forgot about this page:

http://www.xbox.com/en-us/Live/Engin...-and-xbox-live

It's probably worth a look in addition to the other information and links in this thread.


All times are GMT +1. The time now is 15:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum