![]() |
Economy 7 Immersion Heater Help.
I wonder if any of u guys can help me.
I have an econemy 7 immersion heater and its been problematic since day one when i moved in... In the 2 years ive been here its been repaired 16 times, 2 years ago it had 2 new elements and 4 new thermestats and today now its had another 4 new thermestats. Whats happening is when they fit them they r fine until they switch power on and then they trip out and from then on it has to be on maximum to get any sort of hot water what so ever. The electrician today has stated that all it can be is the element and the tank has to be drained AGAIN! and 2 new elements placed in it AGAIN! Its really starting to stress me out now, before i moved in it was supposed to have been changed and never was and even when i moved in wasnt working and i feel as if im being messed about. Can anyone shed any light on this? |
Re: Econemy 7 Immersion Heater Help.
Quote:
|
Re: Econemy 7 Immersion Heater Help.
I've seen lot of heating elements that were DOA, or fail withing the first few hours of use. Checks showed that suppliers were being duped into buying counterfeit items through a wholesaler... less cost to them, big cost to the user.
|
Re: Econemy 7 Immersion Heater Help.
This is the type of 'Incoloy' element I used very successfully:
http://www.qvsdirect.com/3kW-Incoloy...-pr-18335.html If hard water isn't your problem then dodgy parts or some problem with the installation seems the most likely reason. |
Re: Economy 7 Immersion Heater Help.
Apparently they are coming tomorrow to drain the tank and fit two new elements.
|
Re: Economy 7 Immersion Heater Help.
Quote:
|
Re: Economy 7 Immersion Heater Help.
To think that the hardest part about changing an element is removing the old one.
10 years is the expected life of an element, thermostat can't predict on lifespan. As has been said earlier incalloy is the prefered material for elements because of its chemical resistance. (I have one element (base of tank) still o'k after 20years but lost count on No of thermostats that have been fitted). Point to remember hard water plus to high a temperature shorten life of element, (read the instruction leaflet for stat 60°C max) |
Re: Economy 7 Immersion Heater Help.
Surely, where Economy 7 water heating is the sole source of hot water, it's far more demanding on the elements than where an immersion heater is just being used to supplement the hot water provided by, say, a gas boiler. Perhaps not a surprise that the elements need more frequent replacement then?
One other thing. IIRC copper cylinders are supplied with an internal sacrificial anode which is supposed to limit the effects of corrosion inside the tank. Before we had our E7 system ripped out, I noticed the anode inside the cylinder had been completely eroded away over the years and I'm wondering if this is what caused the gradually increased frequency of problems we had with failing elements over time. The cyclinder we had was a very large on and the hardest part of the job for me was draining it in order to access the elements (hose pipe into cylinder and suction to drain the water). If tradesmen are doing likewsie and charging hourly (which most do) I wouldn't be surprised if they quite like a nice easy immersion heater job... ;) |
Re: Economy 7 Immersion Heater Help.
2 new elements and 2 new thermistats today. The Thermistat worked for 6 mins in the booster immersion and died Now waiting for them to see if they can come back out today.
|
Re: Economy 7 Immersion Heater Help.
Quote:
The heaters are a nominal 3Kw = 12 amps load The thermostats are 15amp switching capacity Unless they have picked a foreign make, that should have been o'k. |
Re: Economy 7 Immersion Heater Help.
Quote:
Well hopefully its done now.... 2 new elements and 3 new thermastats just got to wait till the morning now to see if the Econemy 7 Works. I hope no one was listening by my door when the plumbers were draining the water... The drainage valve on the bottom wouldnt open so they had to drain from top of tank, u had one plumber by the tank and the other one in the bathroom sucking on a hose saying "This is discusting its hitting the back of my throat and gagging" and then u had the plumber by the tank saying COME ON SUCK IT SUCK IT!. |
Re: Economy 7 Immersion Heater Help.
Well the booster part when u run out of hot water on the econemy 7 isnt working properly and needs to be looked at again. Was on for 95 mins and give me about 4" of hot water in the bath before going freezing cold again.
This will be the 19th time tommorrow that its been looked at in 2 years. |
Re: Economy 7 Immersion Heater Help.
Is this a council property?
If so I would be speaking to someone with a loud voice. Housing association likewise would be getting a tongue lashing. Its just unbelievable that something like this is happening today. (As a retired electrician this should not happen, words fail me.) |
Re: Economy 7 Immersion Heater Help.
This all seems very odd to me. Are the guys doing this work competent and trustworthy? Have the same people always done the repairs or have different companies and suppliers been involved? :confused:
If I was paying for all this nonsense I'd be hopping mad! |
Re: Economy 7 Immersion Heater Help.
Quote:
Before i moved in back in Nov 2008 i was told the tank was gonna be replaced and a few other jobs were due to be done. They kept the keys for 6 weeks and NO! jobs were done, The immersion still wasnt working when i moved in, they were supposed to have painted the place before i moved in as its a Housing association property and they didnt do that, they told me the radiators were leaking and were gonna be changed yet they r storage heaters so how can they leak? and this is why i put in a complaint with the ombudsman and it was upheld back in 2008 ---------- Post added at 13:42 ---------- Previous post was at 13:38 ---------- Quote:
My electric heater wasnt working in the bathroom and i told the electrician the element was going and he said i quote "no its not, i have been doing this job for over 10 years, u can turn them up inside". He took the cover off the heater, did something turned it on and there was a loud bang, a blue flash and it took 2 days to get the smell of singed plastic out of my flat. i said to him "well if u have been doing this for 10 years i think u best find another vocation". ADMIN EDIT (CHRIS): The swear filter is there for a reason. Please don't try to dodge it by selectively *ing out words. |
| All times are GMT. The time now is 07:29. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum