![]() |
Any Drum experts here?
3 Attachment(s)
Hey guys, well a couple of days ago my dad wanted me to move my drum kit so he could put a shelf up, but in the process of moving the kit my Hi hat collapsed and now I need to fix it I have attached some pics below to see if you can help its only the top part that I need to fix so that I can use it again when I come to practice.
|
Re: Any Drum experts here?
Quote:
It looks like you just need to screw the top hi hat mount back on, if thats what you`re showing us. Your description is a little bit vague.:erm: Felt washer goes against the top cymbal then the metal washer, then the top clamp, not too tight. |
Re: Any Drum experts here?
1 Attachment(s)
Here is a pic of the stand with the bottom cymbal so you can see what im trying to achieve
|
Re: Any Drum experts here?
Quote:
|
Re: Any Drum experts here?
Ok thats confusing me already, Ive got the felt washer on the top cymbal, then the metal washer, then the clamp, then what do i do?
|
Re: Any Drum experts here?
Quote:
Look on the spindle that moves up and down when you put your foot on the pedal, you might find the nut on there. Either that or you have dropped it when you took the top hi hat cymbal off. |
Re: Any Drum experts here?
Its fixed on but too high, do I need to adjust the nut on the bottom of the top cymbal?
|
Re: Any Drum experts here?
Quote:
Lower the top cymbal and then tighten the clamp so the top cymbal is about 20-30 mm from the bottom cymbal. Show me a picture of it please. |
Re: Any Drum experts here?
1 Attachment(s)
here you go. I have also tried putting my foot on the pedal and loosening the clamp but its a no go
|
Re: Any Drum experts here?
Quote:
|
Re: Any Drum experts here?
No im not taking the ****, otherwise I wouldn't be asking
|
Re: Any Drum experts here?
Wayne are you trying to get the two cymbals closer together?
|
Re: Any Drum experts here?
Ok. Undo the top clamp on the top cymbal so it falls onto the bottom cymbal. press the hi hat pedal down to the bottom, lift your foot up about 25 mm and then tighten the top cymbal clamp up. this should give you the correct distance between your top cymbal and your bottom cymbal.:)
---------- Post added at 23:22 ---------- Previous post was at 23:15 ---------- Have you tried what i suggested mate? ;) |
Re: Any Drum experts here?
Quote:
---------- Post added at 23:25 ---------- Previous post was at 23:23 ---------- Quote:
|
Re: Any Drum experts here?
Quote:
The nut underneath should`nt prevent it from closing buddy. Have another look at it. If not, then ask your neighbour.:) You can always pm me with pics if you like. |
| All times are GMT. The time now is 10:07. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum