![]() |
Risk assessment in the work place
I am looking as to the best way to inform my employer that we need to carry out a risk assessment on the factory and how we do things pertaining to the lifting of panels and timber.
This is as much for my benefit as my colleagues. I have just been signed off from work again with lower back pain, another week’s wages lost. Any links or advice would be greatly apreaciated. TIA Alan |
Re: Risk assessment
|
Re: Risk assessment
You could always ask the HSE to pay him a visit, how many people work for your company is it more than 5 ?.
If you have been off work for more than 3 days, with a work related injury your boss should be reporting it under the RIDDOR regs if memory serves. Which can in turn provoke an early visit from (Oh look its the Elf and Safety) You could start off by asking your boss to undertake a manual handling risk assessment which should pick up on any issues and point him in the right direction. |
Re: Risk assessment
if there are more than 5 employees i think you must have them done by law. They must be reviewed within a time frame, usually a year, or when an incident occurs. Any work related injury that results in more than 3 days off is reportable under RIDDOR (Reporting of Incidents, Diseases and Dangerous Occurrences Regulations). Anyone competent can do them.
|
Re: Risk assessment
Quote:
---------- Post added at 17:29 ---------- Previous post was at 17:21 ---------- Quote:
We have an independant safety advisor come round once a month who does a walk through, jots down a few notes, mainly about trip hazards, poor house keeping etc, makes a report to the owner who seldom actions any reccomendations. ---------- Post added at 17:34 ---------- Previous post was at 17:29 ---------- Quote:
|
Re: Risk assessment
Here is the HSE page with the regulations
http://www.hse.gov.uk/riddor/riddor.htm Quote:
|
Re: Risk assessment
is there a union at work? either for yourself or the office workers?
because they should have more info etc on safety matters |
Re: Risk assessment
Quote:
No union unfortunatly :( |
Re: Risk assessment
You could always work out how much its costing him in sick pay and lost production a year, then come up with a plan (possibly by using manual handling equipment to make the job easier) and a cost for improvements, with any benefits in throughput.
I've hit brick walls when dealing with directors and upper management before, but when you lay down the cold hard facts about the true cost of sickness, lost production, poor staff morale etc, they usually start to listen. A lot of people just see H+S as being an unnecessary expense, but in reality it can improve production whilst reducing risk, if applied correctly. Is your employer aware of his legal responsibilities, couldn't hurt to remind him/her. I get safety publications each month, and if I stumble across any director prosecutions, I ACCIDENTALLY photocopy the article and leave a copy in their pigeon hole :) |
Re: Risk assessment
Has everyone received Manual Handling training. This is now a compulsory course for ALL employees, even desk jockeys?
Also there should be reporting of Accidents & Near misses which do not come under RIDDOR rules. This is to ensure that if someone trips on a step (for example) the H&S person does a Risk Assessment to see if there is an issue with lighting, loose stair carpet or whatever and the problem is prevented. If this is not done or followed up the company will be liable for any claims made by these injury lawyer companies on behalf of injured staff. |
Re: Risk assessment
Your first port of call, is to bring it to the attention of the person in the company, who has responsibility for health and safety. If this person is refusing to carry out their statutory duty, then you should approach that person's line manager/director. If they refuse to conduct the risk assessments, then your next step is to talk to the HSE for advice.
|
| All times are GMT. The time now is 02:36. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum