![]() |
Poor sound quality on HD channels
I have an optical cable running between my V+ box and my 5.1 amp. All SD channels sound perfect, but as soon as I switch to an HD channel I get popping noises and crackling.
Does anyone else experience this? It's putting me off watching the HD channels! Is my V+ box faulty? Thanks |
Re: Poor sound quality on HD channels
Have you switched the HDMI overide on in Audio & video settings on the V+ box?
It might be irelevent, I am just curious to know if it happens with it on or off. If it happens on both then there could be a signal issue. Has the optical cable got plenty of flexiblilty? Duke |
Re: Poor sound quality on HD channels
Will try that tonight and report back
|
Re: Poor sound quality on HD channels
It's not just you handsy - I get the same. Not all channels though. HDMI override is on but noticeably on BBCHD and ESPNHD...the same popping. I think BBC were aware of the 5.1 problem but I'm not sure if it's been fixed or it affects everyone.
For the record, I have tried the optical out on BBCHD from my FreesatHD box and still the same. So it's either BBCHD or my amp :( |
Re: Poor sound quality on HD channels
Quote:
|
Re: Poor sound quality on HD channels
FYI, I had this the *very* first time I hooked my V+ up. After a reboot it went away and never came back in two years.
|
Re: Poor sound quality on HD channels
Quote:
|
Re: Poor sound quality on HD channels
I would get this reported to faults mate. It could a problem from the broadcaster which could be effecting many in an area but some will not know if they do not have an amp or use optical.
Duke |
Re: Poor sound quality on HD channels
Will try the 'HDMI Audio Override' settings tonight before calling in the fault. Thanks all.
|
Re: Poor sound quality on HD channels
Sorry for tardy reply!
I turned the 'HDMI audio override' setting on/off, and now I get no crackling audio on HD channels! Bug? |
Re: Poor sound quality on HD channels
Was the crackling coming from the TV speakers? It happens if you give a stereo-only device a Dolby signal. I suspect you have made the problem go away by setting the V+ output to stereo.
|
Re: Poor sound quality on HD channels
If you read my 1st post you'll see I'm running an optical cable from the V+ box to my 5.1 amp. Thanks
|
Re: Poor sound quality on HD channels
Yes, I know. My question is what does your TV do when it receives a Dolby signal (over the HDMI). The V+ outputs the same audio format on optical and HDMI, so if you are sending 5.1 to your amp, your TV is getting it too. A stereo-only TV will decode this as crackles.
The usual solution is to turn the TV volume down when using the amp. |
Re: Poor sound quality on HD channels
Ah OK sorry.
My TV speaker is OFF, and always has been. The crackling was coming from my 5.1 system only. |
Re: Poor sound quality on HD channels
Oh, OK. So do you have the audio override on or off now?
|
All times are GMT +1. The time now is 01:56. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum