![]() |
Quick Hunch
Downstream Status
Operational Channel ID 2 Downstream Frequency 331000000 Hz Modulation QAM256 Bit Rate 10242000 bps Power Level -2.27 dBmV Signal to Noise Ratio 35 dB Upstream Channel The data shown in the table below provides information about the signal being transmitted to the network from your cable modem. Upstream Status Operational Channel ID 1 Upstream Frequency 22200000 Hz Bit Rate 514000 bps Power Level 50.50 dBmV Is this a normal power levels because like others i am on 10MB and its so slow :( got a Scientific Atlanta DPX100 modem https://www.cableforum.co.uk/images/...2009/12/17.png |
Re: Quick Hunch
Local levels are ok, call VM to check for network related issues.
|
Re: Quick Hunch
Very rare to see one of those modems where the frequency has not drifted, as Xocemp says call in.
|
Re: Quick Hunch
Quote:
|
Re: Quick Hunch
Quote:
|
Re: Quick Hunch
331000000 Hz is the frequency your modem and card on the ubr is set to, the DPX100 could lose that frequency and suffer slow speeds or an intermittent connection.
So your downstream frequency would look something like 331.250000 Hz |
Re: Quick Hunch
ah now i know :) thanks
|
| All times are GMT. The time now is 13:58. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum