![]() |
Power Levels For Cable Broadband And Cable Tv
What should the downstream power level be and the snr and what should the upstream power level be?
|
Re: Power Levels For Cable Broadband And Cable Tv
Are you ex-Telewest or ex-NTL?
|
Re: Power Levels For Cable Broadband And Cable Tv
ex-Telewest
|
Re: Power Levels For Cable Broadband And Cable Tv
Downstream SNR, above 30 is preferred, 28ish being the lower limit (i think)
Downstream power should be as close to 0 as possible, with the limits being -6dbmv to +12dbmv Upstream power should be no lower than around 32dbmv and no higher than 58dbmv. If you are on QAM16 the power level should not be higher than +55dbmv. |
Re: Power Levels For Cable Broadband And Cable Tv
DS I wouldn't have it higher than +10 ... field runs with -10 - 10 across the board .. but it depends who you speak to ...
|
| All times are GMT +1. The time now is 01:38. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum