Distributing source signals over fibre
 

Not specifically related to cable but hoping someone here can help me.

I'm recabling a large property which will have up to 10 AV nodes. As Freesat receivers are cheap and most TVs now come with DTTV receivers built-in I'm proposing to distribute the source signals to each node. Obviously I could use WF100 coax (which is what I've done in the past) but I'm planning on installing a fibre network anyway so am investigating the feasibility of that meeting all my needs (DTTV, Satellite TV, Cable TV, data, VOIP).

I have a few questions:

1. Presumably a fibre network can easily handle the bandwidth to distribute satellite or cable HD signals (Sky HD and, when available, Freesat and DTTV HD)?

2. Can the same physical fibre carry multiple AV sources (e.g. DTTV + Freesat + Sky) simultaneously or does it have to be switched? If it can how are they multiplexed/demultiplexed?

3. Similarly, can the same physical fibre carry both AV and an IP network simultaneously, if so how?

4. What kit do I need at the central point (to convert DTTV/Satellite/Cable signals to fibre) and the individual nodes (to convert back to feed into the satellite or TV receivers)?

5. Who are the main manufacturers of this kit (for serious home or small commercial - e.g. hotel - use), not hobbyists (it needs to be reliable with minimal maintenance)?

6. What order of cost am I looking at?

7. Is this a sensible approach or should I really be sticking with coax to each node, in parallel with a Cat5e or Cat6 network for data/phone use?

A lot of questions - but I'd really appreciate some views on this.

My main motivation for going the all-fibre route is that this is a major and messy re-cabling project I only want to do once, and I need to future-proof it for all potential sources/uses (and also agaionst the possibility of fibre to the home eventually).

Many thanks

Re: Distributing source signals over fibre
 

A little late - but may be of interest to some...

Kstone..
Opticreach.com