![]() |
5Ghz Networks
I am looking for a decent 802.11a access point/client unit but not one with b/g support as it is going to be for a backhaul on my network, i have setup plenty of 2.4Ghz networks but i need some extra range on this one as it will be over 10 miles unless someone can point me in a better direction.
|
Re: 5Ghz Networks
Do you have any expectations of access speed?
|
Re: 5Ghz Networks
well i only need to have about 2meg throughput.
|
Re: 5Ghz Networks
Quick, back of fag packet calculation with LOS between the sites and a 22dbi panel antenna at each end* fed with 5m cable of you should be good for about 11 miles at 6mbps.
Don't forget your licence ;) *Based on the bridge's power output & gain factors staying with in legal limits |
Re: 5Ghz Networks
Can you recomend a make/model because a google at it finds loads of a/b/g stuff i just need a 5Ghz only! argh google
|
Re: 5Ghz Networks
|
Re: 5Ghz Networks
I wish i could afford such luxuries do you know anything in the lower price bracket, as im trying to get a few customers in the new area im moving into to see if its viable to purchase better equipment? i looked into buffalo as i find there kit is unbreakable but found nothing in the 5ghz stuff.
|
Re: 5Ghz Networks
OK this Net-El one is a far cheaper alternative and seems to be a common offering around the lower price points but I have no idea as to the efficiency or robustness of this kit. It's a dual band bridge: 2.4GHz and 5GHz Band B/C
http://www.solwise.co.uk/wireless-ou...-noc-8610.html |
Re: 5Ghz Networks
iv no idea if this will get the longer range, id rather go for 22DBI highly direction dish types but something like this panel with intigrated wireless to save on the cable loss perhaps...
http://www.mikrotik-store.eu/product...2f907fd91ae7f8 MikroTik RIC 522T 5GHz intgrated router 203,00 EUR excl. 19 % Tax excl. Shipping costs MikroTik RIC 522T 5Ghz integrated antenna with fast RB/333 is ideal for powerful 5Ghz Backbone (Point-to-Point link). Also, it can be used for CPE (client premise equipment) on 5Ghz Point-to-Multipoint networks.
---------- Post added at 12:56 ---------- Previous post was at 12:52 ---------- Quote:
oc your going to get a lot better coverage with 2.4Ghz 11N if you use highly directional line of site, assuming if you dont have a lot of 2.4Ghz between sites... the spec of that Motorola PtP 400 lite Bridge Kit Includes: 2 x Motorola PtP 400 lite Units 2 x Mounting Brackets Price: £3,456.00 (£3,974.40 inc. V.A.T.) kit is a little OTT today for 22Mbps it seems, you could get a microwave 1gigE radio for that... |
Re: 5Ghz Networks
Quote:
That's just the official line of course... |
Re: 5Ghz Networks
true, but you are allowed to use as high a power / by DB gain so as to cancel out any pigtail connector loss and cable loss you might get in the total output calcs, it takes a little more thought but doable to keep it totally UK legal.
|
Re: 5Ghz Networks
There's a useful-ish calculator on here which provides a rough idea. You have to play around with the figures to suit the UK regs though.
http://www.cisco.com/en/US/products/hw/wireless/ps5279/ I have a slightly more involved tool here but it most certainly isn't in the public domain ;) |
Re: 5Ghz Networks
i cant find the page now , but i seem to remember that all UK external unlicenced Point to point wireless kit gets a higher total DB gain/power allowance rating than your average internal consumer wifi kit, for some reason upto 200mW seems to stick in my mind, but cant find the page to verify Doh!
Uncle Peter, are you a radio Ham or Pro radio guy playing with your interesting wireless toys ;) |
Re: 5Ghz Networks
http://www2.ofcom.org.uk/radiocomms/...s/rlans/5_6wbd
IR2006 for bands A and B IR2007 for band C @popper - lapsed radio ham and occasional involvement with RF type things on a professional level. |
Re: 5Ghz Networks
Thanks for the input the item from solwise seems to be good, like i said its just to try and get some usomers in a new area my main links are usually SAF 7.5Ghz they are amazing and i get nearly 100meg throughput on those!
|
All times are GMT +1. The time now is 07:30. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum