![]() |
Vista 64 bit cable modem 351000 driver
Hi there.
I have recently upgraded to Vista 64 bit and have consequently lost internet access on that computer. The reasons being my ethernet card driver and the driver for my Ambit/ntl Cable modem 351000. I have ordered a new ethernet adaptor with 64 bit driver, but so far have not been able to find a suitable driver for the cable modem. Does anybody know where one can be found, or alternatively are there any other solutions to the problem? Any advice would be gratefully received as I need to get that computer back on the internet asap!! Thanks! |
Re: Vista 64 bit cable modem 351000 driver
you will not need a driver over ethernet for the modem
Hows old the machine for Vista X64 not to have a driver for it? is it really upto Vista X64? |
Re: Vista 64 bit cable modem 351000 driver
if you're connecting via ethernet, you don't need one for the modem
|
Re: Vista 64 bit cable modem 351000 driver
The cable modem does not need a drier for the computer
The only tihng that you need is the ethernet card with 64 bit driver and the cable connected to the modem |
Re: Vista 64 bit cable modem 351000 driver
wish I thought of that ;)
|
Re: Vista 64 bit cable modem 351000 driver
Thanks to zinglebarb for the quick reply. It will be great if my new ethernet card can get the modem going again. The modem is quite a few years old now, but I am stuck with it as there don't seem to be any more modern coax cable modems available (they are all ADSL now) and I don't want to uppgrade my existing broadband package just yet.
|
Re: Vista 64 bit cable modem 351000 driver
:confused: From that last post, I'm not really sure what bit of kit is causing you the problem. Was your old PC connected to the modem via USB? If so, give up on that and use the ethernet connector which, as others have said, will only need the windows based drivers for the ethernet card, not for the modem as well.
If you have a cable modem then it will normally have either only an ethernet port for the most modern types, or an ethernet and USB port (you can use one or other, but not both simultaneously). All cable broadband is supplied via the coaxial type connectors, with modems supplied by Virgin Media as part of your subscription. If the modem is faulty, or otherwise unsuited through perhaps call Virgin Media for a replacement. ADSL is somewhat different as instead of the ISP providing the modem, you can often purchase your own, frequently with a combined router, to plug into the phone socket type connector. You can't buy your own cable modem for Virgin Media (once upon a time in the very early days you could, but not now or for a long time), so routers are a standalone piece of kit that connects to the cable modem's ethernet port. |
Re: Vista 64 bit cable modem 351000 driver
Quote:
Connect to the modem via ethernet. The only drivers you need are to enable your ethernet card to be used with Windows. The modem will not need any drivers. |
Re: Vista 64 bit cable modem 351000 driver
the thing which confused me is why they did usb to start off with. My old teryaon modem was ethernet only, and I would naturally want to use that type of connection for lan/internet. All of a sudden when usb 2 came out it is as if everyone wanted to use it for everything and it just seemed bizarre that anyone would want to use it for internet access. To start off with virgin were telling everyone to use it and knocking out cds with all the crappy software and stuff on, and now they are telling everyone not to use it. You would have thought they would have done it the proper way to start off with. It is like me telling everyone to connec their monitors through usb instead of dvi.
|
Re: Vista 64 bit cable modem 351000 driver
Quote:
The other option would have been to only support ethernet, and require that people open up their pcs and put cards in (at least until USB ethernet adaptors appeared). |
Re: Vista 64 bit cable modem 351000 driver
my first Motorola SB4 series was usb only my second was Ethernet. It was also only 512kbps which usb handled fine lol
Least you know you got the right solution here 4 others have given the same answer as I did in post 2 ;) hehehehehehe |
| All times are GMT. The time now is 00:55. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum