Virgin Cable and eMule Ports
 

Hi, I have the bog standard Virgin cable modem and wanted to know how I can open ports / setup port forwarding for emule?

Before switching to Virgin I had normal DSL and a router so I'm familier with doing this but how do you do this with the Virgin cable modem? As far as I'm aware I have no login to access the modem!!

Many thanks in advance

Re: Virgin Cable and eMule Ports
 

All the ports are already open on a cable modem.... The only thing stopping them will be either your router if you have one or your firewall again if you have one..

---------- Post added at 17:28 ---------- Previous post was at 17:26 ----------

Also the login should be on http://192.168.100.1 (it should tell you what the default password/username is but I think it's root/root

Re: Virgin Cable and eMule Ports
 

Many thanks. Don't have a router and the firewall is turned off but still get a Low ID !!!

Re: Virgin Cable and eMule Ports
 

what router do you have?

Re: Virgin Cable and eMule Ports
 

;)

Re: Virgin Cable and eMule Ports
 

low id could mmean that you have very little to upload on emule, remember its a file sharing program and relys on you uploading at the same time as downloading. If u dont have much to share then your id willl be low.

Also, check the notifications in thhe emule servers tab, it will tell you if a particular port is unreachable

Re: Virgin Cable and eMule Ports
 

Low ID is nothing to do with how much you're sharing. Turn Windows firewall back on then add the e-mule ports ( http://www.emule-project.net/home/fi...74438622_1.jpg ) as exceptions.