![]() |
Ethernet over Power Adapters
Is anyone using these successfully and are they giving you better throughput than wireless ?
|
Re: Ethernet over Power Adapters
Moved to "Networking".
|
Re: Ethernet over Power Adapters
Quote:
|
Re: Ethernet over Power Adapters
Would it be feasible to run a switch off one of these 200MBps units connected to say 10 pcs and at the other end connect to a router via a second 200MBPs homeplug.
My network is 10/100 atm with cat5 connecting my switch to my router and I dont have any speed issues with what i need my pcs to do. |
Re: Ethernet over Power Adapters
I doubt there would be any issues with the setup, but bandwidth may be an issue if those 10 pcs are all fairly heavy bandwidth users.
|
Re: Ethernet over Power Adapters
Quote:
http://www.devolo.co.uk/uk_EN/produk...lessextsk.html I am typing this on my lappy which connects wirelessly to my homeplug access point, which connects to the router over the power lines. The router is upstairs, and the homeplug access point provides wireless cover on the ground floor. |
Re: Ethernet over Power Adapters
Thanks for the advice. I guess I will only know if i try it.
Damned expensive option mind you even though prices of thes e things have dropped. On a related issue are there many power over ethernet devices around atm or do you buy kits to convert suitable perfierals etc ? |
Re: Ethernet over Power Adapters
Just put " home plugs" into google
|
Re: Ethernet over Power Adapters
Quote:
I tend to need a solid connection and more throughput than i can get on wireless. The wireless option you mention would be a good choice for a lot of people though - Obviously it would be easy to stick an in expensive switch on the end for those connections you wanted a hard wire. |
Re: Ethernet over Power Adapters
Quote:
It's been rock solid mind, so it was money well spent. Quote:
|
Re: Ethernet over Power Adapters
Quote:
I mean power of ethernet not ethernet over power. So devices that drw their power supply via an ethernet cable. |
Re: Ethernet over Power Adapters
I,ve just bought the Solwise pl220av PUSH adapters to run my cable connection to the top floor of my 3 storey terraced house. I just plugged them in and pressed the button on both ,running up 2 flights of stairs and VOILA the connection was made, fantastic.
I thought I may not see my full speed of nearly 10 meg going thru old wiring and all that BUT when I ran my favourite speedtest it was as near as dammit the same .I,m really well chuffed,Expensive relatively,but what price is put on a secure connection. |
Re: Ethernet over Power Adapters
I remember this was being discussed about 8 years back when NorWeb was doing trails at providing an internet connection along the mains supply.. I know they had problems with the signal radiating and due to no encryption meant that people could spy on the connection... Does the current ethernet on the ring mains have encryption?? just that you are passing data along a large non-shielded or non-twisted antenna ;)
|
Re: Ethernet over Power Adapters
Quote:
JUst let someone set a network up like this anywhere near me, they can moan all they want, but if I happen to transmit at a frequency and power that I am licensed for, then they'll just have to suffer their network going down regularly. Sorry, but manufactures of devices capable of emitting RF can't just design their devices to transmit where they want, they also get it in to their heads that even if a device doesn't interfere with with me, I could still interfere with it while still remaining perfectly legal myself. Taken from a well know Amateur Radio site: "There are alternatives to this technology, wired or wireless solutions. UK regulator Ofcom are logging complaints as spectrum abuse and it's known that in three cases the adaptors have been removed by BT following complaints to Ofcom." |
Re: Ethernet over Power Adapters
Quote:
;) |
All times are GMT +1. The time now is 05:29. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum