Cable Forum - Actiontec 54 Mbps Wireless Cable/DSL Router

Cable Forum (https://www.cableforum.uk/board/index.php)

- Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)

- - Actiontec 54 Mbps Wireless Cable/DSL Router (https://www.cableforum.uk/board/showthread.php?t=33632622)

mac4	07-05-2008 19:50

Actiontec 54 Mbps Wireless Cable/DSL Router

Hi
I have been using my router and realised that I am not secure, however I cannot seem to be able to get into the settings to select secure network, I went to the site http://198 etc only to find you have to put in a password which I dont have. I emailed Actiontec and they tell me to reset the router which I must say I am loath to do it was a pain setting up in the first place. Does anyone know how I can get into the settings to make my network secure!! without the reset
Thanks :dunce:

Aragorn

08-05-2008 09:35

Re: Actiontec 54 Mbps Wireless Cable/DSL Router

According to Google -

Quote:

Originally Posted by ActionTec FAQ

What is the default username for the router?
The default username for the router is admin all lower case. To activate the password to protect the router you must change the default password, which is blank. You will also not be able to turn on remote management until you have changed the default password.

If it is not blank, it has been set by someone - have you tried 'password'. If it was supplied by NTL/Virgin, try ringing the tech support line. I assume you have checked there isn't a sticker on the bottom?
If all that fails, then yes you will prob need to reset.

mac4	08-05-2008 17:04

Re: Actiontec 54 Mbps Wireless Cable/DSL Router

Hi
when I get onto the http://198 etc I am met with a box where I need to put in the username and the password is blank, I have never entered a password, are you suggesting just typing in "password" I am going to give it a try I, I suppose I will eventually reset. Thanks for the input.;)

All times are GMT +1. The time now is 19:01.