![]() |
PA3 (Paisley-ish...) connection problems?
I live in the PA3 area and im having nothing but problems for the past ~4 days. Basically every now and then the connection just drops, with the ENET/SYNC/RDY lights on solid, with nothing else. It's the NTL:Home 120 modem. A hard reset usually brings service back after a minute, but without the reset it just hangs like that.
Anyone else in this area experiencing similar issues? Here's some info from my modem: Cable Modem Configuration Type : Ambit ETH/USB Combo Cable Modem Cable modem : Ambit Cable Modem MAC address : xx:xx:xx:xx:xx:xx IP address : xx.xx.xxx.xxx Downstream Receive Power Level : -3.64 dBmv Downstream SNR : 36.03 dB Upstream Transmit Power Level : 48.00 dBmv Downstream Status Downstream Lock : Locked Downstream Frequency : 402750000 Hz Downstream Modulation : 256 QAM Downstream Receive Power Level : -3.73 dBmv Downstream SNR : 35.74 dB Upstream Status Upstream Frequency : 37500000 Hz Upstream Transmit Power Level : 48.00 dBmv |
Re: PA3 (Paisley-ish...) connection problems?
Your D/S, U/S, and SNR levels all look ok, your frequency may be out a little, maybe someone else could check that though, what level BB are you on?
I would post in the news groups and explain the situation, maybe they will send you a new modem as the 120's are notorious for being iffy. |
Re: PA3 (Paisley-ish...) connection problems?
Im on 4mbit... And been on the "middle tier" since i've been with them - well over 6 years (then NTL). I've had a similar issue in the past but it wasnt as frequent and it seemed to be an issue in my whole area as my dad was affected too.
|
| All times are GMT +1. The time now is 22:42. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum