![]() |
Really annoying modem dropouts - "T3 Timeout"
For a few days now we've been having trouble with our VM broadband in RH10 postcode. At first it was random cutouts of all services for about two to three hours at a time. Recently the cable modem has been cutting out every five to ten minutes, working again only after a hard reset. Is this a known issue that will resolve itself at their end, or should I call for an engineer to take a look at the damned thing? Given the stupid cost of their tech line I thought I'd check here first.
|
Re: Really annoying modem dropouts
most likely modem frequency or someting like that
check on the config page and post the levels here address for modem 192.168.100.1 onto the signal page and post what its showing on here have you checked their status phoneline? |
Re: Really annoying modem dropouts
Thanks! Results are such.
Downstream Status Operational Channel ID 7 Downstream Frequency 339250000 Hz Modulation QAM256 Bit Rate 20480000 bps Power Level -3.24 dBmV Signal to Noise Ratio 31 dB Upstream Status Operational Channel ID 2 Upstream Frequency 29200000 Hz Bit Rate 768000 bps Power Level 53.00 dBmV ---------- Post added at 19:42 ---------- Previous post was at 18:38 ---------- Okay, been having issues again after half hour of solid use. I noticed the logs seemed a bit odd: Quote:
|
Re: Really annoying modem dropouts
If you are an ex-telewest customer then you're modem is on the wrong frequency.
for the scientific atlanta epc2100 go to http://192.168.100.1/gscan.asp for the webstar dpx100 go to http://192.168.100.1/gscan.htm delete starting frequency, type in 339000000 press enter, you should get message saying set successful modem will reboot and should then be on the correct frequency. |
Re: Really annoying modem dropouts
ah, ya sneaky wee so and so
if you do as mags said shud fix you're problem. if not and you check your frequency and it's still the same try once more and if it still fails call tech support who can order a replacement modem. |
Re: Really annoying modem dropouts
Quote:
Thanks for that! I actually discovered it on my own after about an hour of googling the T3 error and it's all fixed now, but your effort is very much appreciated. I wonder how many other people were affected by it - I can't help but think it's related to the recent outages we've been having in RH10 area. Do VM replace old modems? I read somewhere that the Webstar DPX100 isn't rated for 20mbps, is that correct? |
Re: Really annoying modem dropouts
yeah, that is correct.
they will only replace the modem if it has a fault on it or if you are on the 20mbps service and therefor need a new modem. the modems are supposed to last you as long as your on the service so they wont replace it just because it is an older model. |
| All times are GMT +1. The time now is 21:45. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum