Cable Forum - Help with VM VISTA NTL 250 AND NETGEAR

Cable Forum (https://www.cableforum.uk/board/index.php)

- Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)

- - Help with VM VISTA NTL 250 AND NETGEAR (https://www.cableforum.uk/board/showthread.php?t=33622213)

RS100

11-10-2007 21:45

Help with VM VISTA NTL 250 AND NETGEAR

I have VM 20mb cable via a ntl 250 modem and a netgear WGT624 V3 rougter hooked up to my pc via ethernet,

I leave my pc 24/7 in my home office but the problem i have is if i leave the pc say for a hour the internet stops working and i have to type ip config/release then ipconfig/renew to get it to work again,

Any ideas how i can fix this problem,

zing_deleted

11-10-2007 21:57

Re: Help with VM VISTA NTL 250 AND NETGEAR

router problem. update firmware. just as a test reboot rooter see if that sorts it before the renew

homealone

11-10-2007 22:30

Re: Help with VM VISTA NTL 250 AND NETGEAR

Quote:

Originally Posted by RS100 (Post 34412838)

Quote:

Originally Posted by zinglebarb (Post 34412846)

router problem. update firmware. just as a test reboot rooter see if that sorts it before the renew

before risking the firmware update, check your router is set to 'obtain an IP automatically' or 'using DHCP' :)

RS100

12-10-2007 11:16

Re: Help with VM VISTA NTL 250 AND NETGEAR

I have the latest firmware and every thing is set as you have said,

Quote:

Originally Posted by homealone (Post 34412866)

before risking the firmware update, check your router is set to 'obtain an IP automatically' or 'using DHCP' :)

All times are GMT +1. The time now is 20:06.