![]() |
Changed from HDMI to scart
Hi all, and for my first post, I have a problem ;)
I recently had a lightning strike hit our house, it took at a number of AV bits, including my HD tv :mad:. The tele is being repaired under house insurance, so I'm now stuck with a naff 24" CRT display. As the tele isnt HD, I'm now using the scart connection on AV1. This is coming directly from the V+ box, but sound is going via optical to my amp (as it always has been). I'm getting sound from the V+ box, but no picture. No picture what so ever, as if there isnt a signal. Now I assume this is because its still trying to output over the digital/HDMI channel? How do I switch it back to analogue/scart? I've rung VM, but they have been useless. So I've tried holding down OK with standby, and then pressing reset. This then brings up a screen on the tele! IMPORTANT do not turn off... blah blah, however, after I assume, some scan, it reboots and apart from a flash white screen, I'm back to nothing on the tele.... I've even tried the format trick using the remote, but still no picture. Anyone got any ideas how I can sort this out, reset to default or soemthing? TIA Dave |
Re: Changed from HDMI to scart
Quote:
:) And welcome to the site :) :) :) |
Re: Changed from HDMI to scart
Quote:
Now 1st, thing, why couldn't VM tell me this, instead of sending an engineer to my house whilst I'm at work, and I didnt ask for such a thing??! And 2nd, why didn't I see that point - possibly because I didnt read all the way to the bottom of the FAQ :lol: |
Re: Changed from HDMI to scart
Glad you've got it sorted :)
About your first point....My neighbour had a similar problem, engineer came round and still couldn't sort it. I had to go round and do it for him lol. |
| All times are GMT. The time now is 16:32. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum