Dynamode BR-6004 4 Port Broadband Router
 

hi there,

i recently bought a Dynamode BR-6004 4 Port Broadband Router and am having many problems setting it up.
to me the instructions arnt very clear, and the help pages on the Dynamode website are all down.
im trying to get it to work on virgin

if anyone could help it would be greatly appreciated

Re: Dynamode BR-6004 4 Port Broadband Router
 

:welcome: to the forum.

How do you connect to the Internet? Do you have a Cable Modem or Set Top Box?

Re: Dynamode BR-6004 4 Port Broadband Router
 

Thanks!

Its a cable modem

Re: Dynamode BR-6004 4 Port Broadband Router
 

It should be a case of unplugging the modem and the router from the mains, then plug modem into the router, and the mains. Let the lights on the modem settle and then plug the router back into the mains.

Re: Dynamode BR-6004 4 Port Broadband Router
 

Instead of plugging the cable modem into the router, make it so you dont need the cable modem at all. Plug your router into you PC by ethernet cable and go to 192.168.1.1 in your internet browser. (it might ask for a password and a user name, they will both be admin) follow the instructions on that site and it should start working.

If not try ringing the manufacturer of the router. (:tu:)

Re: Dynamode BR-6004 4 Port Broadband Router
 

Thats not the case with our connections. Looking at your services, you have 8 meg broadband, which imply you get VM ADSL not VM cable broadband.

We can not get modem/router built into one, we have to use the supplied modem, and if we which to use a router, we have to connect that to the modem.

Re: Dynamode BR-6004 4 Port Broadband Router
 

Had the router plugged in all properly, the instructions then tell me to set it up. Being new to this im kinda lost.

Theres 3 settings for WAN- PPPoE, Dynamic(Dchp) or Static. Is it Dchp i need it set to?
If so for DNS setup do i specify it or set to Obtain from ISP?

Re: Dynamode BR-6004 4 Port Broadband Router
 

dhcp and obtain settings from isp.

Ignore Callumpy he does not know what system you are on.

Re: Dynamode BR-6004 4 Port Broadband Router
 

It should be VM cable broadband, 4mb, unless any changes were made when i moved house, am gonna check with virgin as soon as there computer system works again.

Will the router even work with ADSL?

http://www.play.com/PC/PCs/4-/113509...e/Product.html

---------- Post added at 13:53 ---------- Previous post was at 13:49 ----------

Should i run the Vm setup disk after doing all this?

Re: Dynamode BR-6004 4 Port Broadband Router
 

As long as the connection works without the router, you don't need the setup CD.

Re: Dynamode BR-6004 4 Port Broadband Router
 

No luck in getting it set up that way, this is the settings on the page.

WAN Status
Connect Type Dynamic IP

IP Address 0.0.0.0
SubMask 0.0.0.0
Gateway 0.0.0.0
DNS 1 0.0.0.0
DNS 2 0.0.0.0
WAN MAC 00-a1-b0-01-00-28

LAN Status
IP Address 192.168.16.1
SubMask 255.255.255.0
DHCP Server Enabled
LAN MAC 00-a1-b0-01-00-27

Re: Dynamode BR-6004 4 Port Broadband Router
 

Can I just ask how you are managing to post? Is you pc still connected with the usb cable?

Re: Dynamode BR-6004 4 Port Broadband Router
 

after leaving it for a few minutes, am plugging the modem back into the pc to post.

Re: Dynamode BR-6004 4 Port Broadband Router
 

Hi guys i was hoping you may be able to help me. I have a dynamode BR-6004, I think that a password was set on it but after a power cut and a few problems, the password we had to connect to the router has been disabled, we now cannot access the admin part of the router, we can sign in as a guest but unfort cannot adjust the settings in this mode. I have tried to reset and still no joy does any one ave any ideas??

Re: Dynamode BR-6004 4 Port Broadband Router
 

Oi!!! Don't hijack the OP's thread - make your own!!!:D

Welcome to CF BTW!