Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Firmware flashing advice needed. (https://www.cableforum.uk/board/showthread.php?t=33607287)

bopdude 02-02-2007 10:15

Firmware flashing advice needed.
 
Hi all, following on from this thread, I would like some advice on flashing the firmware of the DVD rom. IIRC I've done an upgrade before but can't remember on what, and how to go about it. So, any advice, I would also like to know how to make a back up of the existing firmware, in case of :D

The drive is a NEC DVD +- RW ND-6650A with firmware version 102C atm.

Thanks for any and all help :tu:

Nanook 02-02-2007 18:34

Re: Firmware flashing advice needed.
 
If this http://www.de.nec.de./productdetail.php?id=1239 is the one, I couldn't find any downloads/firmware for it.

bopdude 02-02-2007 21:07

Re: Firmware flashing advice needed.
 
Quote:

Originally Posted by Nanook (Post 34211862)
If this http://www.de.nec.de./productdetail.php?id=1239 is the one, I couldn't find any downloads/firmware for it.

Thats the one, thanks, and yeah, can't find much on it myself :confused:

morrk 03-02-2007 02:38

Re: Firmware flashing advice needed.
 
http://liggydee.cdfreaks.com/page/en/NEC-ND-6650A/

bopdude 03-02-2007 10:18

Re: Firmware flashing advice needed.
 
Quote:

Originally Posted by morrk (Post 34212113)


Thanks for the link, now how do I back up then flash the firm ware ?

morrk 03-02-2007 13:25

Re: Firmware flashing advice needed.
 
http://liggydee.cdfreaks.com/page/en...sh/binflashgui

I think that should be what your looking for mate.

bopdude 03-02-2007 15:42

Re: Firmware flashing advice needed.
 
Quote:

Originally Posted by morrk (Post 34212241)
http://liggydee.cdfreaks.com/page/en...sh/binflashgui

I think that should be what your looking for mate.

Excellent, good find, thanks :tu:


All times are GMT. The time now is 03:38.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum