Cable Forum - Cant Get This To Work!!!!!

Page 1 of 2

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)

- - Cant Get This To Work!!!!! (https://www.cableforum.uk/board/showthread.php?t=33606426)

Barewolf

17-01-2007 13:13

Cant Get This To Work!!!!!

Since installing the Router (Linksys) I cannot do searches on DC++, and when I use Limewire I get only about 50 When i do a search.

I dont know much about Ports , Port Forwarding etc, But I need to get these two programs working.

Can anyone help? I will probably need to ring up NTL or PC WOrld but i need to know something about what ports i should be using and anything that might help the engineer sort it out for me.

Paul K

17-01-2007 13:20

Re: Cant Get This To Work!!!!!

NTL won't "fix" your ports. Odds are you need to set up your router to work correctly with the router itself. What model router is it and have you changed any settings yet?

Barewolf

17-01-2007 13:27

Re: Cant Get This To Work!!!!!

Quote:

Originally Posted by Paul (Post 34199348)

NTL won't "fix" your ports. Odds are you need to set up your router to work correctly with the router itself. What model router is it and have you changed any settings yet?

Model is...

WRT54GS vER 6.

Only thing i have changed is the Channel for the Laptop, on Channel 13.

Nikesh

17-01-2007 13:45

Re: Cant Get This To Work!!!!!

Here are some links on how to setup DC++ and Limewire with a Linksys WRT54GS router:

DC++ Setup with Linksys WRT54GS router

Limwire Setup with Linksys WRTGS router

Hope it helps.

Barewolf

17-01-2007 14:12

Re: Cant Get This To Work!!!!!

Nikesh. I tried the 1st link exactly, I got the port forwarding and static IP etc etc. Soon as I try a search in DC++ i get nothing, I dont understand it.

Nikesh

17-01-2007 14:15

Re: Cant Get This To Work!!!!!

Hmm...... I don't understand why that wouldn't have worked. I don't know what else to suggest. Sorry.

Graham M

17-01-2007 14:15

Re: Cant Get This To Work!!!!!

Is there a setting for UPnP on your Router BareWolf? And is it enabled?

Barewolf

17-01-2007 14:21

Re: Cant Get This To Work!!!!!

Quote:

Originally Posted by Zeph (Post 34199410)

Is there a setting for UPnP on your Router BareWolf? And is it enabled?

Theres no buttons on the router Zeph no. Would it be in Config on router?

Graham M

17-01-2007 14:21

Re: Cant Get This To Work!!!!!

Quote:

Originally Posted by Barewolf (Post 34199414)

Theres no buttons on the router Zeph no. Would it be in Config on router?

It would be on the Configuration pages :erm:

Barewolf

17-01-2007 14:27

Re: Cant Get This To Work!!!!!

Firmware Version:v1.50.6,Capture(month.num2) Feb. 17, 2006

Current Time:Capture(week.num4)Wed, 17Capture(month.num2) Feb 2007 05:25:03

MAC Address:[Admin Edit: Removed]

Router Name:WRT54GS

Login Type:Capture(stacontent.dhcpmode)Automatic Configuration - DHCP

IP Address:[Admin Edit: Removed]

Subnet Mask:[Admin Edit: Removed]

Default Gateway:[Admin Edit: Removed]

DNS 1:194.168.4.100

DNS 2:194.168.8.100

Capture(share.mtu)MTU:1500

---------- Post added at 13:27 ---------- Previous post was at 13:24 ----------

Theres no configuration page i can see Zeph

Ramrod

17-01-2007 14:27

Re: Cant Get This To Work!!!!!

I don't think you want to share that info Barewolf!!! :erm: :disturbd:

Doofy

17-01-2007 14:30

Re: Cant Get This To Work!!!!!

Quote:

Originally Posted by Ramrod (Post 34199419)

I don't think you want to share that info Barewolf!!! :erm: :disturbd:

Definitley not if i were you i would edit that lot on a side note i have this same router and the firmware sucks. I ended up flashing mine with a custom firmware much better, but not for the faint hearted :dozey: pain in the **** to flash it.

Ramrod

17-01-2007 14:31

Re: Cant Get This To Work!!!!!

Quote:

Originally Posted by Barewolf (Post 34199417)

Theres no configuration page i can see Zeph

have you logged onto the router?

Nikesh

17-01-2007 14:32

Re: Cant Get This To Work!!!!!

Could Barewolf or a passing mod edit that post?

Barewolf, on my Linksys WRT54G router, the UPnP setting is under the Administration tab on the configuration pages. Go on http://192.168.1.1 to access your router configuration pages.

Barewolf

17-01-2007 14:45

Re: Cant Get This To Work!!!!!

UPnp Is enabled Nikesh

All times are GMT +1. The time now is 02:15.

Page 1 of 2

Show 100 post(s) from this thread on one page