Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media TV Service (https://www.cableforum.uk/board/forumdisplay.php?f=11)
-   -   BYP2100 bypass unit problem (https://www.cableforum.uk/board/showthread.php?t=33605129)

roughneck 18-12-2006 22:27

BYP2100 bypass unit problem
 
Hi all.

My second tv scans & picks up the following terrestial channels from the loft aerial.

BBC1 (CH44 - 655.25MHz)
BBC2 (CH51 - 711.25MHz)
ITV1 (CH47 - 679.25MHz)
FOUR (CH41 - 631.25MHz)
FIVE (CH37 - 599.25MHz)

All from EMLEY MOOR I believe.

All pictures are good quality.

My main TV & Samsung STB doesn't have an external aerial nearby so out of convenience (& simplicity) I fitted a BYP2100 bypass unit.

However, when I scan for available channels I can only obtain BBC1, BBC2, ITV1 & FOUR and all are not great quality either.

I also noticed that the channel no's & frequencies (from the bypass) are different too.

i.e. BBC1 (CH23 - 487.25MHz)

There doesn't appear to be any channels available on frequencies above 600 MHz.

Is there anything I can do?

Regards

Roughneck

Nedkelly 18-12-2006 23:14

Re: BYP2100 bypass unit problem
 
When using a bypass the channel line up will be different if you are getting bad pics is the power supply connected it is under the bypass on the samsung .Are you using the samsung pypass

roughneck 19-12-2006 15:13

Re: BYP2100 bypass unit problem
 
Hi

My tv 'discovers' the following channels via the Technetix BYP2100 bypass.

BBC1 on 487.25MHz (CH23?)
BBC2 on 503.25MHz (CH25?)
ITV1 on 519.25MHz (CH27?)
FOUR on 535.25MHz (CH29?)

The STB's RF channel is 53.

The pictures are watchable but not as good as via loft aerial.

All connections are good & properly seated.

Would I be correct in assuming that only certain Band IV analogue signals are delivered via the bypass?

Where would Channel 5 be?

Any help is appreciated.

Roughneck.

spiderplant 19-12-2006 19:35

Re: BYP2100 bypass unit problem
 
On the Bromley network (which includes Leeds) the frequencies don't align with standard UHF channels numbers, so your TV is having difficulty tuning. Channel 5 is probably on a frequency that your TV can't tune to at all.

I'd recommend an aerial!

roughneck 20-12-2006 18:27

Re: BYP2100 bypass unit problem
 
Quote:

Originally Posted by spiderplant (Post 34182730)
Channel 5 is probably on a frequency that your TV can't tune to at all.

Thanks for your reply.

I have tried tuning 2 other tv's using the bypass and still the same results.

BBC1 on 487.25MHz (CH23)
BBC2 on 503.25MHz (CH25)
ITV1 on 519.25MHz (CH27)
FOUR on 535.25MHz (CH29)
FIVE ?????????????????????

I guess I will have to re-route my existing aerial downlead :(

A lesson learnt perhaps?

Roughneck.


All times are GMT. The time now is 20:13.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum