![]() |
ntl:250 event log - is this normal?
I keep getting these 'critical' alerts on my ntl:250:
"Started Unicast Maintenance Ranging - No Response received - ..." Around 5-10 per day.... is this normal? |
Re: ntl:250 event log - is this normal?
Cant say for sure that its normal. All I can say is that I get them as well.
Since 8:58 Tuesday morning, I have had 6 of those critical messages, plus 26 other critical messages. Strange thing is, even though my modem is switched on 24/7, I didn't get 1 entry in the log yesterday. |
Re: ntl:250 event log - is this normal?
From Cisco KB:
%UBR900-3-T3_TIMEOUT_II: R05.0 Started Unicast Maintenance Ranging no Response received. T3 time-out. Explanation: The cable modem is online and sent a periodic Ranging Request (RNG-REQ) message to the CMTS, without receiving a Ranging Response (RNG-RSP) from the CMTS within the T3 timeout period. The cable modem will send another RNG-REQ message, up to the maximum of 16 successive attempts. This error message is DOCSIS event message is R05.0, Ranging Request. Recommended Action: No action is needed because it is normal for a cable system to occasionally lose MAC-layer messages, especially when multiple cable modems transmit RNG-REQ messages at the same time. So it's probably nothing to worry about at this point :) |
| All times are GMT. The time now is 17:58. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum