![]() |
Setup STB after redecorating Room
Hey everyone,
I have recently redecorated my room and the STB was off for nearly 3 days in that time. I am now putting everything back. So setting up my STB used to have TV ,STB, VCR & DVD STB connected to VCR & TV with Scart & Coaxle VCR connected to TV with Scart & Coaxle DVD connected to TV with Scart I am no longer needing my VCR So i have the setup as STB connected to TV with Scart & Coaxle DVD connected to TV with Scart does this all sound right? also it is stuck on tune (think it is because the STB been off for so long) and my tv 1-5 channels are very fuzzy but the NTL channel looks perfect (but stuck on tune) how can i get this working? is it a call to CS? ik |
Re: Setup STB after redecorating Room
If the STB was off for a while, it might possibly need a kick from CS. Try powering it off again, make sure all leads are firmly in place with the cable feed sceurely screwed home, clean the card in the front of the STB with a dry cloth, and try again.
As for connections, those seem OK, just make sure your scart leads are tow way 21 pin. Some aren't in which case it will be a fiddle to get them feeding right. TV channels 1-5 over co-axial aerial, will only be good quality if your STB has a bypass box, or alternatively you connect in an external rooftop aerial. |
Re: Setup STB after redecorating Room
|
Re: Setup STB after redecorating Room
ok, I dont have an external ariel, so do i need the coaxle from the STB to the tv?
checked all the connections, they are firm, cleaned the card, still fuzzy. a call to cs then, they open just now? ik |
Re: Setup STB after redecorating Room
Quote:
If the channels had expired because the box had been off too long, the box would still boot, but most channels would say "you have not subscribed". As a last resort, call NTL and say you're really really sorry. :angel: |
All times are GMT +1. The time now is 23:02. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum