![]() |
192 IP address problem, seeking advice
Hi all. The ready light went out on my NTL cable modem (Ambit 200), and occasionally kept flashing for the first few seconds after I powered the modem off, removed all the cables and rebooted it, then the RDY went out completely. And in this occasion I could only obtain 192.168 IP address with no DNS. The sync light is fine. Never got 169.xxx IP so I guess it is not my laptopââ‚Ãâ €šÂ¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢s issue. This problem has been happening since about half a month ago, and Iââ‚ ¬ÃƒÂ¢Ã¢â‚¬Å¾Ã‚¢ve also checked the status of my SACM. Here are the statistics:
Downstream Status Downstream Lock : Locked Downstream Frequency : 402750000 Hz Downstream Modulation : QAM64 Downstream Interleave Depth : 32 Downstream Receive Power Level : 0.3 dBmV Downstream SNR : 33.8 dB Upstream Status Upstream Channel ID : 3 Upstream Transmit Power Level : 50.0 dBmV Upstream Symbol Rate : 2560 Ksym/sec Upstream Frequency : 28800000 Hz Upstream Mini-Slot Size : 2 Some event logs show as following: SYNC Timing Synchronization failure - Loss of Sync Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout No Ranging Response received - T3 time-out And here are some details about my laptop: windows xp+sp2, no firewall running, no router in use. Could anyone here give some ideas? Many thanks. |
Re: 192 IP address problem, seeking advice
:welcome: to Cable Forum :D
Are you connecting using ethernet or USB?. Ethernet is more reliable. Either way check that the drivers are current and loding properly. It's woth giving CS broadband fault a call. They can often do diagnostics and troubleshooting remotely that may establish if the modem is working properly. |
Re: 192 IP address problem, seeking advice
is the ip address either 192.168.100.10 or 192.168.100.3 ?
if so, it means that the pc is not leasing a public ip address from ntl's network for some reason... it could be an ip shortage in your area, or a problem with the cable modem, but either way you will need to get in contact with tech support. If the ip address is anything else, post back with what it is, and what the default gateway is. If it starts 192 it is safe to post the full ip in public because it is a private address anyway :) |
| All times are GMT. The time now is 19:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum