Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Labeling software (https://www.cableforum.uk/board/showthread.php?t=30472)

bopdude 17-06-2005 15:49

Labeling software
 
Hi all, i have been trawling the net for and using various progs to make cd / dvd labels / inserts, most of the ones I've found are either shareware or are not that good at sizing / resizing the finished product. Can anyone recommend a good free prog, or any prog for that matter thats easy to use :dozey: ;)

TIA

PS, I did search but it brought back zilch :tu:

Raistlin 17-06-2005 16:10

Re: Labeling software
 
What products have you tried so far (the ones that aren't good at sizing/re-sizing?

bopdude 17-06-2005 16:15

Re: Labeling software
 
Quote:

Originally Posted by Raistlin
What products have you tried so far (the ones that aren't good at sizing/re-sizing?

Cover xp, accoustica, exPressit, they are ok in some points but not one of them gives an all in one package that I like, I've been reading about doing label's in M$ word, any ideas anyone :shrug:

kronas 17-06-2005 16:19

Re: Labeling software
 
Quote:

Originally Posted by bopdude
Cover xp, accoustica, exPressit, they are ok in some points but not one of them gives an all in one package that I like, I've been reading about doing label's in M$ word, any ideas anyone :shrug:

do you have nero ? if so it has nero cover designer with it.

bopdude 17-06-2005 16:20

Re: Labeling software
 
Quote:

Originally Posted by kronas
Quote:

Originally Posted by bopdude
Cover xp, accoustica, exPressit, they are ok in some points but not one of them gives an all in one package that I like, I've been reading about doing label's in M$ word, any ideas anyone :shrug:

do you have nero ? if so it has nero cover designer with it.

It does ??? I'll check it now, :tu:

kronas 17-06-2005 16:22

Re: Labeling software
 
Quote:

Originally Posted by bopdude
It does ??? I'll check it now, :tu:

i have nero 6 and it installed with it.....

dilli-theclaw 17-06-2005 16:24

Re: Labeling software
 
I use nero cover designer too. Well for discs that are going out. If it's something I've taped with my dvd recorder I just use a brother ptouch labeling machine.

bopdude 17-06-2005 16:25

Re: Labeling software
 
Quote:

Originally Posted by kronas
Quote:

Originally Posted by bopdude
It does ??? I'll check it now, :tu:

i have nero 6 and it installed with it.....

Yep, got it, had a little look at it, will play and let you know, one thing though, on the paper for the cd label itself, the disk is offset, does / is there an allowance for this in Nero ?

kronas 17-06-2005 16:26

Re: Labeling software
 
Quote:

Originally Posted by bopdude
Yep, got it, had a little look at it, will plat and let you know, one thing though, on paper for the cd label itself, the disk is offset, does / is ther an allowance for this in Nero ?

i dont have a clue as i dont use it myself...

bopdude 17-06-2005 16:28

Re: Labeling software
 
Quote:

Originally Posted by kronas
Quote:

Originally Posted by bopdude
Yep, got it, had a little look at it, will plat and let you know, one thing though, on paper for the cd label itself, the disk is offset, does / is ther an allowance for this in Nero ?

i dont have a clue as i dont use it myself...

I'll try a bit later :tu:

And thanks Dilli :)

dilli-theclaw 17-06-2005 16:29

Re: Labeling software
 
I'm not sure what you mean by offset? When I used to actually do the cd labels (I don't bother any more I just use a pen for the actual cd/dvd) I just printed it out and used the cd label machine I have to stick it on.

kronas 17-06-2005 16:29

Re: Labeling software
 
Quote:

Originally Posted by bopdude
I'll try a bit later :tu:

And thanks Dilli :)

sorry about that though, i dont print labels so i have not used the software.

Raistlin 17-06-2005 16:30

Re: Labeling software
 
Click

File > Paper Stocks

You can choose the manufacturer of your paper in there, if you go through some of the different options you will see that it offsets by the right amount for each.

bopdude 17-06-2005 16:50

Re: Labeling software
 
Quote:

Originally Posted by Raistlin
Click

File > Paper Stocks

You can choose the manufacturer of your paper in there, if you go through some of the different options you will see that it offsets by the right amount for each.

Thanks Raist, got that bit, now I just have to pair up the paper i have with the right template, I bought the paper a long time ago .. lol, I'll get there :) I've started printing onto normal A4to save my good labels, a few to choose from though :(

Raistlin 17-06-2005 17:02

Re: Labeling software
 
You can create a user defined stock.

Click on User Defined Stocks at the top of the list
Click Add Stock
Now Click Stock 1 and rename to whatever you like
Measure your paper and set the size appropriately
Now click Add Item and select Label
Now click on Label 1
Set the inner and outer radius after measuring your own labels
Now set the position of the item on the page
Repeat for each label on your paper
Click OK

The defined stock is now available.
__________________

Might take some fiddling to get it just so, but you can print some test prints onto blank A4 and see which bits you need to jiggle slightly to get it to work.


All times are GMT. The time now is 06:13.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum