Cable Forum
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Science & Technology (https://www.cableforum.uk/board/forumdisplay.php?f=26)
-   -   Camcorder help please! (https://www.cableforum.uk/board/showthread.php?t=29586)

smicer07 31-05-2005 21:35
Camcorder help please!
 
Just found an oldish camcorder, a JVC one, it uses the new type of cassettes, but I want to transfer footage from small cassette to VHS cassette. I tried playing through the AV channel and trying to tape it, but it didn't work.. how else can I put it onto VHS? There's no USB lead so I can't transfer it to computer either... Any ideas?
Cheers

paulyoung666 31-05-2005 21:36
Re: Camcorder help please!
 
you used to be able to get an adapter that would let the small tape fit in a regular sized vhs casing , dont know if you can still get them though :shrug:

smicer07 31-05-2005 21:43
Re: Camcorder help please!
 
Is that the only way? :(

dilli-theclaw 31-05-2005 21:44
Re: Camcorder help please!
 
What is the model number of the camcorder?

SMHarman 31-05-2005 22:47
Re: Camcorder help please!
 
You have a cassette?
What does it say on it VHS, VHS-C, Beta, DV, Mini DB, Video8, Hi8?

smicer07 01-06-2005 10:45
Re: Camcorder help please!
 
Model number is JVC GR-FX 16, the cassettes have VHS-C on them..

Paul K 01-06-2005 10:57
Re: Camcorder help please!
 
According to a site I found a spec on it should have 1 x composite video/audio output. So you could in theory output it to a video via the correct cable/ adaptor.
Oh and the pack should have included an A/V cable and SCART-Phono adapter so it should be possible to get the right cables etc.

Chris 01-06-2005 10:58
Re: Camcorder help please!
 
You need a VHS-C adaptor - looks like a VHS tape with a hole in the front to slot the tape into. Then you can play it in a normal VHS video recorder.

However if you want to transfer from VHS-C to VHS, you ought to be able to do that by cabling the camcorder and the VCR together.
__________________

Found one:

http://www.dixons.co.uk/martprd/stor...hs-c%20adaptor

Stuart 01-06-2005 11:00
Re: Camcorder help please!
 
The camera should have some sort of output. It will probably have two or three phono sockets (one yellow, the others red and black). These look like http://www.keene.co.uk/pages/cat/thumbnails/CMPSNY.GIF

It may (but probably not) have an s-video socket
http://www.cofa.unsw.edu.au/units/re...kett_small.jpg


Your VCR will probably have one or two Scart sockets http://www.rfconcepts.co.uk/scart.jpg

You should be able to get a lead (make sure it is switchable, or wired for Scart IN) to connect one of these sockets to the Phono sockets on the camera).

IF your camera has s-video outputs, and you know your video is capable of taking s-video input on the scart socket (the VCR will be marked s-vhs rather than vhs), then use a Scart cable with an s-video socket.

You should then be able to record from the camera to the video.

Paul K 01-06-2005 11:05
Re: Camcorder help please!
 
Quote:
Originally Posted by smicer07
Just found an oldish camcorder, a JVC one, it uses the new type of cassettes, but I want to transfer footage from small cassette to VHS cassette. I tried playing through the AV channel and trying to tape it, but it didn't work.. how else can I put it onto VHS? There's no USB lead so I can't transfer it to computer either... Any ideas?
Cheers
How did you connect it to do this? If you have a lead that connects to the video you will see the picture on the screen while it is playing if you are tuned into the correct chanel. If you are using a scart adaptor you may need to connect it directly to the scart input on the video player itself.

Chris 01-06-2005 11:14
Re: Camcorder help please!
 
Quote:
Originally Posted by scastle
The camera should have some sort of output. It will probably have two or three phono sockets (one yellow, the others red and black).

It may (but probably not) have an s-video socket



Your VCR will probably have one or two Scart sockets

You should be able to get a lead (make sure it is switchable, or wired for Scart IN) to connect one of these sockets to the Phono sockets on the camera).

IF your camera has s-video outputs, and you know your video is capable of taking s-video input on the scart socket (the VCR will be marked s-vhs rather than vhs), then use a Scart cable with an s-video socket.

You should then be able to record from the camera to the video.
Actually this sounds like a fairly old camcorder so it will almost certainly not have S-video.

It most probably has a lead combining a BNC and a phono jack on one end to go into the back of the Video, and either BNC and Phono, or something proprietory, on the other end to go into the camera.

There won't be red and black phono leads unless the camera has stereo sound, which is unlikely. Most probably there is just one black phono jack for audio and a BNC alongside it for the video.

http://www.maplin.co.uk/images/Full/1047i0.jpg

As your VCR almost certainly does not have a BNC socket (they are rarely used in domestic applications these days) you may need a new cable.

But please, end this speculation and tell us what you've got!

smicer07 01-06-2005 11:15
Re: Camcorder help please!
 
I connected the camcorder to the TV using the Scart lead, then tried to record the AV channel using the video...

Chris 01-06-2005 11:16
Re: Camcorder help please!
 
Quote:
Originally Posted by smicer07
I connected the camcorder to the TV using the Scart lead, then tried to record the AV channel using the video...
Right - what you should have done is connected the camcorder to the VCR using the scart lead and then selected, and recorded, the AV channel on the VCR!

smicer07 01-06-2005 11:17
Re: Camcorder help please!
 
It has yellow and white connections, and I have a lead which connects the camcorder to the video..

Paul K 01-06-2005 11:17
Re: Camcorder help please!
 
Quote:
Originally Posted by Chris T
Quote:
Originally Posted by smicer07
I connected the camcorder to the TV using the Scart lead, then tried to record the AV channel using the video...
Right - what you should have done is connected the camcorder to the VCR using the scart lead and then selected, and recorded, the AV channel on the VCR!
Oiiiii!!!!
http://www.cableforum.co.uk/board/sh...7&postcount=10
Does no one read my posts anymore :cry: :p:


All times are GMT. The time now is 14:49.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum