Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Replacement for an AMD K6-2 500? (https://www.cableforum.uk/board/showthread.php?t=28909)

Raistlin 19-05-2005 21:46

Replacement for an AMD K6-2 500?
 
Hi Guys,

Anybody got any idea what would be the fastest chip I could replace my AMD K6-2 500 with, without having to change the motherboard?

Thanks

dilli-theclaw 19-05-2005 21:50

Re: Replacement for an AMD K6-2 500?
 
MMMmmm - Probably a k6 III - 550mhz

Not worth doing in my opinion.

I don't supose you could tell us what motherboard you've got?

bmxbandit 19-05-2005 21:52

Re: Replacement for an AMD K6-2 500?
 
K6-2/550, or possibly a K6-3/500. check the mobo manual...

it's not really worth it!

Richard M 19-05-2005 21:53

Re: Replacement for an AMD K6-2 500?
 
K6 2/3 mobos are all ATX aren't they?
You could probably get a cheap 1.XGHz Duron and mobo for £30-40.

bmxbandit 19-05-2005 21:53

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by Richard M
K6 2/3 mobos are all ATX aren't they?
You could probably get a cheap 1.XGHz Duron and mobo for £30-40.

not always, no - i have an old AT one.

Raistlin 19-05-2005 21:55

Re: Replacement for an AMD K6-2 500?
 
Ummmmm.....

That's not good.....

The motherboard is in my old PC which I use as a server, I just plugged it in and the PSU is making popping/arking sounds (I haven't even switched it on at the front yet.....).....

Oh sh*t.....
__________________

Hmmm, and I can smell that sort of burning smell you usually get from Scalextric controllers!

dilli-theclaw 19-05-2005 21:56

Re: Replacement for an AMD K6-2 500?
 
The older ones were AT....

The last one (board) I had with K6 series cpu on it had an AT and an ATX power connector on it.

bmxbandit 19-05-2005 21:56

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by Raistlin
Ummmmm.....

That's not good.....

The motherboard is in my old PC which I use as a server, I just plugged it in and the PSU is making popping/arking sounds (I haven't even switched it on at the front yet.....).....

in that case, i strongly suggest you don't!

dilli-theclaw 19-05-2005 21:57

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by Raistlin
Ummmmm.....

That's not good.....

The motherboard is in my old PC which I use as a server, I just plugged it in and the PSU is making popping/arking sounds (I haven't even switched it on at the front yet.....).....

Oh sh*t.....
__________________

Hmmm, and I can smell that sort of burning smell you usually get from Scalextric controllers!

With luck it COULD just be the psu....

Hope so dude.

edit - if it's JUST a server do you NEED more than 500mhz?

Anyway if your'e cpu has popped I may have a k6 knocking about in my spare parts drawer. (not a 500mhz one tho - more like 400)

Raistlin 19-05-2005 22:05

Re: Replacement for an AMD K6-2 500?
 
Well..... At least I don't have to worry about replacing the processor just yet :D

Bugger!

Don't want to replace the PSU and then find that the mobo is fried as well..... Would rather just get a whole new tower.....
__________________

ARSE!!!

Ok, so, anybody got any idea where I can get a really cheap unit to replace the one that I have.

Must have a network card but other than that I don't care too much about the spec as long as the processor/memory are no worse than what's in this one (processor as above 256Mb memory).

I have two 80Gb Seagate Barracudas that I can take out of this one (assuming they work) and if the motherboards are compatible I can even use the memory that I have (assuming that isn't fried!).

FECK!!!

zing_deleted 19-05-2005 22:09

Re: Replacement for an AMD K6-2 500?
 
Ive a selection of k 2 or 3 anyone is welcome to ,I dunno if they work or not though,problem with messing with soc7 is you have to jumper everything,multiplier, vcore,fsb nightmare without a manual ,god I never realised how easy it became with auto clock

Ive got a duron or 2 low clock speeds again not sure if they work ,would fit a soc a board about 17 quid off ebuyer for cheapo variety

bmxbandit 19-05-2005 22:11

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by Raistlin
Ok, so, anybody got any idea where I can get a really cheap unit to replace the one that I have.

ebay?

i'd test all the parts if you can (forget the mobo and psu), though by the sounds of things a few bits and bobs went bang!

try a local independent computer shop or fair, usually good places to pick up old parts for cheap.

dilli-theclaw 19-05-2005 22:12

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by Raistlin
<snip>

How far away from sunny Sandy in Bedfordshire do you live?

Jon M 19-05-2005 22:12

Re: Replacement for an AMD K6-2 500?
 
http://www.novatech.co.uk/novatech/s...tml?BB-SP265BB

£140 cheap as chips

Raistlin 19-05-2005 22:15

Re: Replacement for an AMD K6-2 500?
 
Quote:

Originally Posted by dilligaf1701
How far away from sunny Sandy in Bedfordshire do you live?

According to this:

http://maps.google.com/maps?saddr=St...re,+SG19&hl=en

Not far.....
__________________

Quote:

Originally Posted by s1lv3r
http://www.novatech.co.uk/novatech/s...tml?BB-SP265BB

£140 cheap as chips

Ooooh, now that looks good.....


All times are GMT. The time now is 17:50.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum