![]() |
TV Flickers Using Samsung Box But Not On Aerial Channels
I have just had my Pace box upgraded to the newer Samsung box so I can have the 2Mb broadband service.
Since we have have had that done the TV starts up in black and white and flickers between black & white and colour. The same thing happens when switching cable channels using the remote control.I thought this was just a minor glitch but it's still doing it now after a few weeks. Strangely when I switch to the usual terrestrial channels provided by the aerial there isn't a problem. I have my setup rigged so that my VCR, my NTL STB and my DVD player are all connected to the one SCART socket on the TV using a 3-in-1 SCART unit. Another annoying thing is that unlike my Pace box I cannot access the settings and find the optimum settings for my setup. Has anyone else had these problems? |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Firstly check the scarts are seated firmly in there sockets.
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Quote:
I checked all connections and they seem OK. Wonder if the Samsung box is too fast for my old TV. The TV's probably refreshing at 50hz. Mybe that's the problem or maybe the scart sockets can't cope. |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
the TV and samsung should both be 50hz :Yikes:
its probably just a slight syncing issue with an older TV :) |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Have you tried removing the SCART switcher and connecting the Samsung box directly to the TV?
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Is it an NTSC/SCEAM/PAL Setting?
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Does the Samsung have S-Video output?
Sounds like the kind of effect I get on my TV when my DVD is in S-Video mode and it's plugged into the scart socet that doen't do S-Video. Check the PAL/RGB/S-Video settings on your ntl box. |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
nope, samsungs doesnt have s-video (none do anymore!)
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Quote:
On the old Pace box it was possible to swap between composite video and RGB, but there is no settings access on the Samsung remote. I suspect that the Samsung box is sending out RGB signals which the SCART switcher can't deal with. Anyone found a way to access the settings at all? |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
My opologies if I misunderstand your request! But do you mean to change the stb output between rgb and composite? If so press the guide button on your remote control, select settings from the menu, then select tv picture signal, here you can change the output between rgb/composite.
Hope that helps, once again sorry if that's not what you meant! ;) |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Quote:
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Cheap-o scart splitter? What equiptment have you got? Try running something (DVD player or whatever) through the VCR socket on the NTL box. Whenever the DVD is on, the NTL box will allow the signal to pass through.
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
What make/model SCART switch do you have, ntluser?
|
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Quote:
My setup is like this:- Ribbon SCART cable from NTL box to VCR Aerial to RF input on VCR RF Cable direct from VCR RF output to TV SCART Cable from NTL box direct to Argos Adaptor SCART Cable from DVD player to Argos Adaptor This setup allows me to record a cable channel while watching a terrestrial channel or vice versa. |
Re: TV Flickers Using Samsung Box But Not On Aerial Channels
Quote:
http://www.argos.co.uk/webapp/wcs/st...clickfrom=name |
| All times are GMT. The time now is 15:00. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum