Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   WAP54g - need a new supply - help (https://www.cableforum.uk/board/showthread.php?t=27177)

slewis1972 13-04-2005 11:25

WAP54g - need a new supply - help
 
Ok - NTL broadband, have a Linksys WAP54g - and the power supply has died - reason why I know that as daughter dropped something on it and now it dont work.

So - need a new powersupply. I understand the power supply is a 5volt 2.5Amp - any chance you can pikc these up from say Maplins or Argos?

Scott

Graham M 13-04-2005 11:29

Re: WAP54g - need a new supply - help
 
Your best bet is to get a multi-voltage adaptor, thing is i dont think most do 5v but 4.5 and 6 either side of it, you could try 4.5 i guess, but if that isnt enough power to kick it into life, you COULD try 6 *DISCLAIMER - If you blow it up with 6 it isnt my fault!!!* OR you could add a resistor into the equation if youre brave enough!

Bifta 13-04-2005 11:37

Re: WAP54g - need a new supply - help
 
Quote:

Originally Posted by slewis1972
Ok - NTL broadband, have a Linksys WAP54g - and the power supply has died - reason why I know that as daughter dropped something on it and now it dont work.

So - need a new powersupply. I understand the power supply is a 5volt 2.5Amp - any chance you can pikc these up from say Maplins or Argos?

Scott

Try phoning Linksys (sorry, not Belkin at all) to see how much a replacement is.

SMHarman 13-04-2005 11:40

Re: WAP54g - need a new supply - help
 
Or Linksys...

https://ssl.linksys.com/rma1.asp

Is the US link - has a power supply option on it.

zoombini 13-04-2005 11:58

Re: WAP54g - need a new supply - help
 
Chances are that something has been knocked loose inside.

Can it be opened & repaired perhaps? (what I'd do but I know how).

I'll have a gander for a replacement.

ere you go althought the plug may not be correct.

or from here model PJ85G
or here model N92AT however these are £20+ so maybe not the best options.

Maybe try
Quote:

For all Linksys UK Power Supplies or spares enquiries please call 01493 748904 or email sales@isomicro.com

slewis1972 13-04-2005 12:00

Re: WAP54g - need a new supply - help
 
Phone Linksys - £20 inc delivery - which is 50% of the cost of a new one

May have to look at these

http://www.maplin.co.uk/Module.aspx?...ldID=&doy=13m4

or one from Argos

Scott

gary_580 13-04-2005 12:10

Re: WAP54g - need a new supply - help
 
try www.ardelectronics.com

Salu 13-04-2005 12:47

Re: WAP54g - need a new supply - help
 
Can you try to claim on the 3 year warrantee that Linksys operate? You can't be sure that the impact caused or exacerbated the problem..

slewis1972 13-04-2005 14:08

Re: WAP54g - need a new supply - help
 
Err can confirm the damage is my fault do as its got a big gash in the casing

Scott

Salu 13-04-2005 14:11

Re: WAP54g - need a new supply - help
 
Quote:

Originally Posted by slewis1972
Err can confirm the damage is my fault do as its got a big gash in the casing

Scott


.....looks over top of glasses, raises an eyebrow and says "I see......"

zoombini 13-04-2005 15:49

Re: WAP54g - need a new supply - help
 
Hmm, start a small fire inside the casing, sue Linksys for damage to room set on fire due to PSU exploding into ball of flames.

Get new PSU at same time.

There, simple. :D

MovedGoalPosts 13-04-2005 17:45

Re: WAP54g - need a new supply - help
 
Quote:

Originally Posted by slewis1972
Ok - NTL broadband, have a Linksys WAP54g - and the power supply has died - reason why I know that as daughter dropped something on it and now it dont work.

Deduct cost of replacement item, including unavoidable upgrade to current model, from daughter's pocket money. That'll teach her. ;)


All times are GMT +1. The time now is 01:38.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum