Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   Router swap - Any likely problems? (https://www.cableforum.uk/board/showthread.php?t=25587)

Derek 13-03-2005 17:12

Router swap - Any likely problems?
 
Currently I have a Belkin router attached directly to my cable modem running 3 (sometimes 4) computers without any problems.

I'm going to be getting a new laptop in a couple of days and was wanting to swap over the existing router for a wireless one. I've aquired a Linksys wireless AP with switch and was wondering if anyone could shed any light on how easy it will be to swap them.

Is it simply a case of switching them over. Rebooting the cable modem and letting the router do the rest for the wired connections or will I need to change anything in the settings of the computers wired up the modem?

Any help/idea/experiences gratefully received.

JohnHorb 13-03-2005 17:17

Re: Router swap - Any likely problems?
 
I THINK if the Linksys is an AP (Access Point) rather than a router, you'l need to keep the existing router and simply plug the AP into it. Not 100% sure though.

Derek 13-03-2005 17:18

Re: Router swap - Any likely problems?
 
It's a combined router and AP.

MovedGoalPosts 13-03-2005 17:18

Re: Router swap - Any likely problems?
 
Probably depends on how you have your current router set up. If IPs and the like are all setup by the router, then simply turning everythign off, plugging in the new one, and turning all back on should sort out your LAN.

However, you will probably have to register your new router with the ntl network, or clone a mac address that the ntl modem. STB is aware of.

JohnHorb 13-03-2005 17:22

Re: Router swap - Any likely problems?
 
In that case, should be a straight swap. The router needs to be set to get it's external IP froom the CM, and to serve the connected computers via DHCP, but that's normally the default anyway. AFAIK, if you are on a SACM rather than STB, there's no need to mess around cloning MAC addresses. Don't forget to set up security (WEP, limiting access to defined MAC addresses etc.) If you're not familiar with all that, I'm sure someone will be along with a link shortly.

Tezcatlipoca 13-03-2005 22:06

Re: Router swap - Any likely problems?
 
I had no problems swapping from a wired router (Linksys BEFSR41) to a wireless router (Linksys WRT54G) with my ntl SACM connection. Just needed a modem reboot :)

Quote:

Originally Posted by JohnHorb
Don't forget to set up security (WEP, limiting access to defined MAC addresses etc.) If you're not familiar with all that, I'm sure someone will be along with a link shortly.

http://www.cableforum.co.uk/board/article.php?a=12 :)

JohnHorb 13-03-2005 22:08

Re: Router swap - Any likely problems?
 
:tu:


All times are GMT +1. The time now is 23:35.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum