![]() |
bios password
is there any way you can clear the password for bios withut taking out the battery or doing something with a jumper? i havent got the password, i havent a clue how to take the cd-rw thing out, it dosent slide out, it seems attached to lots of other pc bits! the battery is under this and i cant get to it!!!! it is a flat pc not an upright one. the pc was given to me, but it needs wiping as everything i touch causes an illegal operation. its a windows 98 and i am trying to put on win 2000, but i understand i have to change the bios settings so the pc boots up from the disc in the drive am i right so far?
yiykes please help i am losing the will to live :Yikes: |
Re: bios password
Unfortunatly you will need to take the battery out or reset the bios using a jumper setting change, there is no way around this, undoing the screws that hold the CD Drive in should give you enough movement to get to the battery without needing to disconnect the wires.
|
Re: bios password
i have undone the screws but it wont budge!
|
Re: bios password
What motherboard is it ... there should be some markings on the main board, a manufacturer or model. If not there are some tools to identify it. Once identified, we can better inform you how best to do this.
|
Re: bios password
Have you looked if the CDROM drive is on rails. Sometimes you have to push a metal clip and it then comes out.
Look everywhere, as there is always a screw hidden somwhere thats been missed. Good luck. |
Re: bios password
|
Re: bios password
|
Re: bios password
thanks ive tried the passwords, but no luck :bigcry:
|
Re: bios password
There is a way round this but it requires a little knowledge of DOS. Firstly download the DOS 6.22 Bootdisk here,
http://www.akcent.pl/pub/firma/boot622.exe Then run the file and follow the instructions (Blank Floppy disk needed). Then reset the computer and boot from the floppy (this will only work if your machine boots from a floppy first (most do)) this will take you to DOS mode. This disk also contains CD-Rom drivers so when it loads your CD-Rom will be mounted and available for use. Now the CD-Rom drive will be R: (but if you have more than one CD-Rom it could be S: or T: etc,) so on the screen type R: followed by return, Now type dir followed by return - if this is your Cd-Rom drive you will now see a whats on the Windows 2000 disk (make sure its in the drive ;)). If its not type S:, then T: etc and try again until you find it. When you have the correct drive type setup followed by return, The windows 2000 installation will then start. Good luck |
Re: bios password
Thankyou so much 4 all your help :hugs:
from jane |
Re: bios password
Most welcome some clever people here.
Welcome again and make yourself at home. :beer: all around.. ( paid for by the admin ) |
| All times are GMT. The time now is 23:54. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum