![]() |
best place to buy cables
Hi all - anyone have any suggestions on the best place online to get some CAT6 (1000) network cable? have a new switch and some 1000nic's in some pc's so figure id better use them :)
Thanks in advance. |
Re: best place to buy cables
www.cableuniverse.co.uk is who i use :)
|
Re: best place to buy cables
|
Re: best place to buy cables
Quote:
|
Re: best place to buy cables
velly cheap at www.ardelectronics.co.uk
|
Re: best place to buy cables
Thanks all, on all pages i check they all sell cat6 or cat5e (im probably ater 5e) but i cant figure out if they are normal network cables u see i have a switch and various pc's i just want to take a wire from each pc to the switch and job done yet reading all the descriptions of the cables they are all "patch" cables now this seems to suggest they are just for short jobs like patch panels etc what i need is 10-20 m's of cat 5e cable (not wanting to make it my self) is i buy for example http://www.datacommsdirect.co.uk/pro...eria=&PT_ID=72 and get the 10m one will that do the job?
also https://sslrelay.com/s75376715.onean...dex.shopscript 30m version still called a patch cable - very confused :) any help would be great |
Re: best place to buy cables
Not much use for anyone not living in Swindon, but I've always found CamLab (just round the corner from House of Fraser... opposite the Railway cottages and the old Museum) to be very good.
|
Re: best place to buy cables
Quote:
|
Re: best place to buy cables
so just cos they call it a patch cable in no way means it is short and used in patch panels .. funny old world :)
|
Re: best place to buy cables
A patch cable is a 5e or 6 cable or the lower specs, but with a connector on each end, If you want a cable to go ointo the back of a patch panel and then to a wall socket, you want loose cable. but if your plugin into a switch then straight into a nic, you want a patch lead...
|
Re: best place to buy cables
thanks for all the help -
just one more question :) i have a load of network face plates that live in trunking i took these off our old 100 network setup, basically all the pc's plugged into the wall face plates and then went through trunking into a patch panel/switch setup ... Im wondering for 1000 based networks do i need special wall plates? or will the old ones do? anything i should be looking out for on them to indicate the speed? i would test but sadley no GB devices yet :) from my reading some have a 5e Module in them - so i assume that would mean it can do 1000 and my older ones probably dont have a 5e module. |
Re: best place to buy cables
oh one more (sorry) what sort of cable is best for cabling 2 LAN points in the same trunking together? Solid or stranded ?
|
Re: best place to buy cables
Yes you want a 5e module, but it normally isnt a problem, as thery are normally well within limits to run 1gb. ive never had any problems, I think problems would come when running cat6!
unless your running some extreme lan system, stranded is probably easier/cheaper... but heres a link for you http://compnetworking.about.com/libr...s/blfaq014.htm |
| All times are GMT. The time now is 23:41. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum