Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   DvD burners (https://www.cableforum.uk/board/showthread.php?t=15778)

SOSAGES 04-08-2004 14:59

DvD burners
 
Hi all - Im after a new burner since my poor old A05 died on me this morning after burning its way through 70 gigs of stuff..

So now im after a new one not fussed about speed - id like a Dvd r- burner or multi format one.

another consideration would be for a Dual burner - while i have no dual DVDs it will certainly be useful in the future no doubt :)

So any suggestions?

Dave Stones 04-08-2004 15:09

Re: DvD burners
 
i have a Pioneer DVR107, or A07 depending on where you buy. got it from http://www.blankdiscshop.co.uk, not one coaster yet :)

if you want dual layer, get the NEC2500 and firmware flash it to NEC2510 to save you a few bob :)

sherer 04-08-2004 15:13

Re: DvD burners
 
i've got a LG one from scan.co.uk which is good.. quite cheap too even burning 4 GB doesn't seem to take that long.. there was a thread about this on here

http://www.cableforum.co.uk/board/sh...ghlight=burner

zovat 04-08-2004 15:14

Re: DvD burners
 
Quote:

Originally Posted by Dave Stones
i have a Pioneer DVR107, or A07 depending on where you buy. got it from http://www.blankdiscshop.co.uk, not one coaster yet :)

if you want dual layer, get the NEC2500 and firmware flash it to NEC2510 to save you a few bob :)

I'd agree with the A07 - stuck one in a mate's PC, and not a single problem (I have an old DVD+R/RW format drive that works ok for me).

Dave Stones 04-08-2004 15:17

Re: DvD burners
 
oh, and as for firmware flashing the NEC 2500 to a 2510, NEC themselves have said this is possible as the drives are identical on the hardware front, it is just not recommended because they don't want to be seen supporting "underhand" tactics, and also it voids your warranty ;)

there is liteon drive that you can do this for as well, i forget which. go hunting http://rpc1.org if you are interested...

Salu 04-08-2004 15:22

Re: DvD burners
 
I'd recommend the NED 2510. I got one last week for £52.38 from http://www.cclcomputers.biz/jscript_...tail_frame.htm

Dual layer is coming.......

SOSAGES 04-08-2004 15:57

Re: DvD burners
 
i have a 107 as well but not for the pc i need the new burner for - i knew about the nec's but i wasnt totally convinced it would be a good dl burner imlooking at the LG GSA-4120B DL but the only issue with that is there is no official support for the Booktype setting (a crucial feature for DVD+R DL to maintain compatibility with dvd players - or so say the tech guys)

bbwannabe 04-08-2004 16:28

Re: DvD burners
 
ive still got my dvd burner same as yours but without all the extras (OEM version) and its still working even after burning over a terabyte of stuff. So im surprised yours didnt last longer.

SOSAGES 04-08-2004 16:38

Re: DvD burners
 
well the 70 gig was just today - ive easily done 800+ dvds now and for somereason it just conked out and as much as id love to muck around and try and fix it and search forums its just getting easier to buy a new one :)

bbwannabe 04-08-2004 16:41

Re: DvD burners
 
ahh ok :)

SOSAGES 04-08-2004 16:47

Re: DvD burners
 
unless u want to send me yours :)

zergchen 04-08-2004 21:55

Re: DvD burners
 
i've got BenQ 8X dual DVD writer, only £50 plus 25 4x dvd+r disk.
ha

mrmassive 04-08-2004 23:26

Re: DvD burners
 
I have a pioneer A07, Nec 2500a, and a liteon 411sw. But id go on ebay go on the worldwide search and get a Pioneer 108 16x writer with 4x dl capability for about 80quid :D . But I can't me car broke down and gave me a £450 headache :mad: . So it's me and the dog tomorrow selling the Big Issue :(

purenuman 05-08-2004 17:08

Re: DvD burners
 
The best for speed and quality (for now)... £79.99

http://www.bigpockets.co.uk/product....07179063b7f263

Fastest on SL & DL

peacedude2k4 06-08-2004 03:08

Re: DvD burners
 
I got a dvd-ram drive here which im still fathoming out how to use LOL.

Any good burning kit, i use this thing on my spare pc.


All times are GMT. The time now is 04:17.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum