Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Memory and CPU FSB running at wrong speed? (https://www.cableforum.uk/board/showthread.php?t=15733)

Electrolyte01 03-08-2004 16:58

Memory and CPU FSB running at wrong speed?
 
My motherboard is the Syntax SV266A, and I was just looking in AIDA32 to see my memory is running in 133mhz (when it's PC2100 memory) and my CPU external clock is at 133mhz?

The BIOS reports the memory in 133MHZ, and there's a switch on the board for the CPU to be in either 100mhz or 133mhz.

But the spec I read said it was 266mhz?

Is it running in 266mhz as I am missing something, or is this board running very slow?

I got an AMD Duron 1800 and 512MB DDR PC2100 memory.

Bifta 03-08-2004 17:14

Re: Memory and CPU FSB running at wrong speed?
 
133mhz is 266mhz DDR, so it's running at the right speed. To have it running at 133mhz your FSB would have to be at 67(ish)mhz which is a bit unlikely.

Electrolyte01 03-08-2004 17:16

Re: Memory and CPU FSB running at wrong speed?
 
*sighs in releif* Thought I was going to have to do more work on this thing again :)

Thanks :)

Electrolyte01 03-08-2004 17:19

Re: Memory and CPU FSB running at wrong speed?
 
Hang on a minute, just looking at that 266MHZ DDR you talked about, I saw this in AIDA32:

Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Chipset Bus Properties
Bus Type VIA V-Link
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s

Notice the 133MHZ (DDR) bit.

Bifta 03-08-2004 17:21

Re: Memory and CPU FSB running at wrong speed?
 
It's running at the right speed, note the "effective clock" reading.

Electrolyte01 03-08-2004 17:24

Re: Memory and CPU FSB running at wrong speed?
 
I hate being 16 :(

ZrByte 03-08-2004 17:26

Re: Memory and CPU FSB running at wrong speed?
 
Quote:

Originally Posted by Electrolyte
snip...
Notice the 133MHZ (DDR) bit.

266 ram is running at double data rate (DDR) basicly this means it does twice as much per cycle, wich effectiveley doubles the mhz. 133x2=266
Its the same on mine, my RAM is currently clocked at 166 wich is equal to DDR333 (PC2700).

Basicly some manufacturers show you the rated speed, i.e. 266 and others show you the actual speed i.e. 133.


All times are GMT. The time now is 03:59.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum