ICS, cross over cable problem
 

Yet another problem, and this is VERY strange. I got my PC's (desktop + notebook) networked together via a cross over cable, but for some reason I can share files, but not the internet. They both run XP, so I ran the network wizard which on the desktop reported that it had a problem networking the computers. I tried manually, which also hasn't worked. Any ideas please?

Re: ICS, cross over cable problem
 

How does either of them access the internet ?

Re: ICS, cross over cable problem
 

The desktop is connected to the cable modem VIA USB, the notebook connects to the internet threw the desktop.

Re: ICS, cross over cable problem
 

Ok, are you using some sort of connection sharing software ?

Re: ICS, cross over cable problem
 

No, i'm using Windows XP's ICS.

Re: ICS, cross over cable problem
 

In that case I will have to leave you in the hands of others - I have never used ICS so I know very little about it.

Re: ICS, cross over cable problem
 

Ok;

I assume you've got desktop connected to the USB modem, and a nic in your desktop and your lappy both connected together via a cross-over cable.

Now on the desktop, find the nic connection (double click boxes bottom right), go to properties, double click TCP/IP (Internet protocol) and go to 'Use the following IP address'.. In the IP address box use '192.168.0.1'... Subnet mask : '255.255.255.0'. Leave the home gateway blank, and click OK or apply, whatever, and close that box.

Now get on your notebook, and open the Nic connection on that. Do the same, go to properties.. go to TCP/IP(Internet protocol).. and go to "use the following ip..." In the IP addy box use : '192.168.0.2', in the subnet mask.. '255.255.255.0'... in the home gateway, you want to be using the PC thats got the net connection, so in that you'd need '192.168.0.1' (as that is the desktop IP connected to the net)..

Reboot, and reset your modem.. and you should be OK.

Re: ICS, cross over cable problem
 

That got the notebook to detect the internet gateway, but the internet does not work.

Re: ICS, cross over cable problem
 

Have you run the ICS on both pcs ??

Any firewall software that might be interfering ??

Re: ICS, cross over cable problem
 

Are packets being transferred between the two computers? Can you still share files with the new settings?

Running the network config tool that WinXP uses may of messed something up somewhat.. There isn't a firewall preventing access is there?

Re: ICS, cross over cable problem
 

For some reason in the night, Windows reset the USB modem connection and renamed it to "Local Area Connection 2" which caused my download of mandrake to finished at 177mb :grind: The only firewall running is Windows XP's own, on the internet connection. I disabled it on the network connection. Yes, I can still transfer files.

Re: ICS, cross over cable problem
 

Power saving kicked in? Flaming menance is that. Save power, shorten component life. Makes me laugh that the "Always On" settings aren't always on :rolleyes: It has to be Microsoft.

Re: ICS, cross over cable problem
 

Is there anything else I can do? BOINC has 17 WU's to upload now. Iv'e tried almost everything (that I know of) but no luck. Default gateway is detect, I can shared files with no problem but it's just the internet will not work on it. Please help, I don't want to have to keep unplugging this one, reseting my modem, then plugging it into my laptop :(

Re: ICS, cross over cable problem
 

Can't help with home networking - never done it nor needed to. Upload your WUs before they expire though, otherwise you'll lose any credit for them.

Re: ICS, cross over cable problem
 

All the ones completed are for 21st so that's 4 days away ;)

It would be better if I could get the internet working on them though :(