Help please: NTL IP addresses & PPPoE!
 

Hi all - A networking novice about to commit some cash and wireless set up time (Linksys Router) seeks advice on whether or not my NTL BB account uses static or dynamic addresses and whether or not I need pay any attention at all to instructions re PPPoE!

Short and simple (yet constructive answers) gratefully received. :dozey:

Re: Help please: NTL IP addresses & PPPoE!
 

while you are waiting for t' experts try the search button at 't top of page:D

Re: Help please: NTL IP addresses & PPPoE!
 

Hello bigjazza and :welcome: to the forums. I think you will find all the answer have been covered in this thread here

Re: Help please: NTL IP addresses & PPPoE!
 

NTL Broadband uses dynamic IP addresses, not static.

PPPoE is not used.

So...

The router will need to be set to "Obtain IP Automatically" (or equivalent wording). I think this is usually the default anyway on Linksys broadband routers (e.g. BEFSR41, WRT54G, etc).

Linksys routers come with very good instructions, & also a handy set-up CD with an easy to use installation "wizard".

Have a look at this thread for using a router to share a broadband connection:

http://www.cableforum.co.uk/board/showthread.php?t=8269


If you're using a wireless router, then also have a look at this thread for very important & useful info on securing a wireless network: http://www.cableforum.co.uk/board/showthread.php?t=8435


That's just about wireless transmission distance...


Still useful info though ;) :)

Re: Help please: NTL IP addresses & PPPoE!
 

Thanks all for the info, especially Tezcatlipoca for spelling it out in simple to understand terms. :)

Re: Help please: NTL IP addresses & PPPoE!
 

For most routers, it's the standard dynamic address (using DHCP) setting, and it saves time if you set the router to use the same MAC address as the PC you signed up with - if you are using that same PC and Ethernet interface (card, or blue USB pod) to set the router up, many of them make it easy to copy the MAC address.

Re: Help please: NTL IP addresses & PPPoE!
 

there is very little point in doing this if you are using a SACM. but good advise if you have STB connection.

MB