Wanted: DIY Enthusiast
 

I need to build some sort of stand thing for my turntables and mixer, DIY and me don't get on, so simpler is better.

Each turntable is approx 50cm wide and about 45 deep, the mixer is around 30cm wide and approx the same depth, I have this shelving unit type thing which is the exact height I need it but it's not wide enough. I was thinking about getting some form of kitchen worktop, sticking some rubber matting under it and whacking it on the top but I can only find worktops in 3 meter lengths and me and saw's just don't get on. I would buy a proper DJ desk affair but don't really want to part with over 300 quid.

Anyone have any ideas?

Re: Wanted: DIY Enthusiast
 

Almost any good woodyard/timber yard type outlet will cut to your exact specifactions, and probably deliver for a reasonable cost.

Most stock a range of worktop and mdf in various dimensions and would advise you on loadbearing etc.

One near me offers a joinery service - give them the idea they will make/fit it if you are not 'Mr Practical'

Re: Wanted: DIY Enthusiast
 

I've just seen B&Q do a sheet of MDF for around 7 quid, 1220mm x 607mm x 18mm, I think the exact widths for my kit are 450 + 450 + 272, leaving a tidy 48mm to spare :D Job done! Thanks for the tip though.

Re: Wanted: DIY Enthusiast
 

£7 should be within budget, then ;)

Re: Wanted: DIY Enthusiast
 

Well add £5 for 10m of rubber draught excluder to stop it slipping about and I'm quids in! The handy thing is, the shelving unit I have is perfectly sized to fit 100's of 12"s on both shelves.

Re: Wanted: DIY Enthusiast
 

I don't want to be accused of costing you more money Bifta ;) but this might be useful:
http://custom1.farnell.com/cpc/categ...uipment&Page=1

Re: Wanted: DIY Enthusiast
 

Bifta, I need some laminate flooring doing when you've finished, thanks :D :D

Re: Wanted: DIY Enthusiast
 

No you don't, trust me, my living room has a wooden floor and it's a complete b@stard to keep clean, dust everywhere, and besides you don't need a mop a carpet! (unless you're mental)

Re: Wanted: DIY Enthusiast
 

Cheers, but I couldn't possibly buy anything from a site that reckons Numark Groove Tool cartridges are "high quality" with "great sound" and "ideal for scratching", they're the sort of styli you'd find on Tomy's My First Record Deck.

Re: Wanted: DIY Enthusiast
 

You can't use a saw? :Yikes:
.....I thought that such things were coded into the male dna.....wonders off shaking his head in disbelief :D

Re: Wanted: DIY Enthusiast
 

Tsch. of course not! I can't garden either, in fact, I'm not sure exactly what I AM good at (apart from pwning you with a sniper rifle in SH ;))

Re: Wanted: DIY Enthusiast
 

:D

Re: Wanted: DIY Enthusiast
 

Some of that was sheer luck, there was like 5 allies just standing around in the spawn area, what was one supposed to do?