Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   100meg on Gigabit setup... (https://www.cableforum.uk/board/showthread.php?t=33708024)

SirThomas 20-08-2019 22:28

100meg on Gigabit setup...
 
A strange one, but maybe someone has an idea as to what's going on here...

So; Gigabit network setup; Modem, router, switch, cabling of Cat6 standard.

Just recently my main PC has been getting auto-negotiated at 100 full duplex. It's always been gigabit previously (and annoyingly you can never force gig duplex on a NIC card).

Reinstalled/uninstalled drivers and swapped ethernet leads - But to no avail. Seems bizarre that the NIC card would suddenly only work in a lower speed. I've tested the switch port with other gig devices and it's fine. I even ran a straight run of ethernet from PC to main router, bypassing switches.

Anyone seen this occur before, any ideas for a fix? I almost suspect Windows 10, as it's been updating recently!

Killer E2200 NIC/AC87u/GS116E If it matters.


Tom

SirThomas 27-08-2019 15:31

Re: 100meg on Gigabit setup...
 
If anyone was curious - A new PCI card proved that the onboard NIC was indeed faulty!

...No idea why, but the pci card shows 1gig and the onboard - 100meg!

Certainly not an issue I've seen before, but maybe of interest to someone in the future!

Tom

General Maximus 27-08-2019 21:39

Re: 100meg on Gigabit setup...
 
annoying and good to know you have fixed it in a round about way. I know I am petty but it is killing me:

Quote:

Originally Posted by SirThomas (Post 36006830)
you can never force gig duplex on a NIC card.

Quote:

Originally Posted by SirThomas (Post 36006830)
Seems bizarre that the NIC card would suddenly only work in a lower speed.

Network Interface Card card?

Hugh 27-08-2019 21:46

Re: 100meg on Gigabit setup...
 
tbf, NIC can also stand for Network Interface Controller...

And people also say "ATM machine", "AC current", "DAT tape", "LCD display", "PIN number", "DC comics", etc. etc.

mike86 16-09-2019 13:08

Re: 100meg on Gigabit setup...
 
Quote:

Originally Posted by General Maximus (Post 36007777)
Network Interface Card card?



:rolleyes:

Matth 21-09-2019 00:09

Re: 100meg on Gigabit setup...
 
https://support.killernetworking.com...d-at-100-mbps/
Seems to be a "try a clean install" issue

pip08456 21-09-2019 10:10

Re: 100meg on Gigabit setup...
 
Quote:

Originally Posted by Matth (Post 36010980)
https://support.killernetworking.com...d-at-100-mbps/
Seems to be a "try a clean install" issue

If the OP had a Killer network card then perhaps.

Nice try at appearing knowledgeable though.

nomadking 21-09-2019 10:14

Re: 100meg on Gigabit setup...
 
Quote:

Originally Posted by pip08456 (Post 36010991)
If the OP had a Killer network card then perhaps.

Nice try at appearing knowledgeable though.

From OP at bottom of Post #1.

Quote:

Killer E2200 NIC/AC87u/GS116E If it matters.

daveeb 21-09-2019 12:11

Re: 100meg on Gigabit setup...
 
Quote:

Originally Posted by pip08456 (Post 36010991)
If the OP had a Killer network card then perhaps.

Nice try at appearing knowledgeable though.


Helpful as ever.



Try www.howtogetoutoftherightsideofthebed :rolleyes:

---------- Post added at 12:11 ---------- Previous post was at 12:08 ----------

Quote:

Originally Posted by General Maximus (Post 36007777)
annoying and good to know you have fixed it in a round about way. I know I am petty but it is killing me:





Network Interface Card card?


LOL out loud :)

Maggy 21-09-2019 20:49

Re: 100meg on Gigabit setup...
 
Let's play nicely.


All times are GMT +1. The time now is 15:28.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.