192.168.0.1 not working, why?
 

i wanted to set up my router(D Link) and i wanted to go to admin to ru nthe set up wizzard and when i try go to 192.168.0.1 to log in and run the wizzard it just says page can not be displayed, any suggestions??

Thanks

Re: 192.168.0.1 not working, why?
 

I assume this is a new router, i.e. no-one has changed the default address from 192.168.0.1 (and that IS the default address for that model of router)?
Assuming the router is set by default to be a dhcp server, make sure your PC's LAN interface is set to 'obtain IP address automatically'. To check that your PC is getting an IP address correctly, open a command window and type

ipconfig /all

The PC's IP address should start 198.168.0

Re: 192.168.0.1 not working, why?
 

quite often on d-link routers the page could also be 192.168.0.254 ;)

check what your gateway ip is cuz thats the address that you need to type in.

Re: 192.168.0.1 not working, why?
 

ipconfig /all wil also confirm your gateway address.

Re: 192.168.0.1 not working, why?
 

hmm this was used on anotehr network about 1 year ago and not sure if it was changed, there is a reset button at the back should i press hte reset button to refresh it??

Re: 192.168.0.1 not working, why?
 

If your resurrecting it from a different network, then I'd do a factory reset. Put's everything to the default settings so you know where you are, and can build up from there.

Re: 192.168.0.1 not working, why?
 

I'd check the manual - not sure if pressing the 'reset' button will revert to 'Factory' settings (which is what you want), or just reboot.

If you don't have a manual, you can probably download one from the D-Link site.

Re: 192.168.0.1 not working, why?
 

Also another suggestion... If you've manually set a proxy (quite common with NTL's proxies) that you set it to exempt local traffic... Otherwise, it will Try and use a proxy to view your router page, and fail.

Re: 192.168.0.1 not working, why?
 

I had problems with my router and looking at the modem config and the reason was that i'd manually set a proxy. Turned manual off and it works.

Re: 192.168.0.1 not working, why?
 

can someone plz add me to MSN and help me, <deleted>

---------- Post added at 22:07 ---------- Previous post was at 21:36 ----------

working, thanks for the help guys :)

edit Rob C: Deleted the email addy. You'd end up with a load of spam.

Re: 192.168.0.1 not working, why?
 

192.168.0.1 why not working?

---------- Post added at 22:44 ---------- Previous post was at 22:41 ----------

Re: 192.168.0.1 not working, why?
 

Well done you've managed to rearrange the words in the thread title, what will your next trick be?

Re: 192.168.0.1 not working, why?
 

That was what I wondered..:)