Cable Forum - Superhub Hub 3 firmware update.

Page 1 of 3

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)

- - Superhub : Hub 3 firmware update. (https://www.cableforum.uk/board/showthread.php?t=33708676)

Brunel

28-01-2020 11:41

Hub 3 firmware update.

28/01/2020 02:01:27 notice SW download Successful - Via NMS
28/01/2020 01:58:50 notice SW Download INIT - Via NMS

Now on. 9.1.1811.401

SnoopZ

28-01-2020 12:02

Re: Hub 3 firmware update.

Just rebooted my Hub3 and i am still on 613.

Martin_D

29-01-2020 02:31

Re: Hub 3 firmware update.

Hub just got the update Software version : 9.1.1811.401

HughA

29-01-2020 08:22

Re: Hub 3 firmware update.

Just checked my Hub3 and found it got the new software on 20th Jan!

Sephiroth

29-01-2020 08:52

Re: Hub 3 firmware update.

... But what is new in the firmware? Anyone tried stuff?

HughA

29-01-2020 09:26

Re: Hub 3 firmware update.

It seems to me that the DHCP and connected device tables populate almost instantaneously now. I don't know if they have improved port forwarding as I have no need to use it.

heero_yuy

29-01-2020 09:27

Re: Hub 3 firmware update.

Quote:

Quote from Sephiroth: ... But what is new in the firmware? Anyone tried stuff?

Bigger, better bugs. Silly. :D

Sephiroth

29-01-2020 16:35

Re: Hub 3 firmware update.

Quote:

Originally Posted by HughA (Post 36023862)

It seems to me that the DHCP and connected device tables populate almost instantaneously now. I don't know if they have improved port forwarding as I have no need to use it.

WiFi attached devices don't show up as connected in the Hub 4. But the upstream power decimal place is correctly located. The Hub 4 menu is identical with the Hub 3.

roughbeast

30-01-2020 08:56

Re: Hub 3 firmware update.

9.1.1811.401 I'm not sure when it installed, but there hasn't been a hub reboot since 16th December.

No changes to service expected, as I am in modem-only mode. Should I expect any? My TBB BQM shows no changes.

SnoopZ

30-01-2020 10:18

Re: Hub 3 firmware update.

Does .401 fix the decimal point issue? i also never see any T1,T2,T3,T4 errors on the upstream tab with .613 and i used to prior to .613.

Brunel

30-01-2020 10:23

Re: Hub 3 firmware update.

Re. Decimal point issue,..... NO!

Sephiroth

30-01-2020 11:02

Re: Hub 3 firmware update.

Quote:

Originally Posted by SnoopZ (Post 36023943)

Does .401 fix the decimal point issue? i also never see any T1,T2,T3,T4 errors on the upstream tab with .613 and i used to prior to .613.

I think that’s coincidence. They have cleaned up the network to accommodate r00 & 1 Gig. Check whether they’ve moved your upstream frequency from the 30 meg range to 40 meg and higher. That clears out noise.

SnoopZ

12-03-2020 12:14

Re: Hub 3 firmware update.

My hub now has 9.1.1811.401 as of 2am last night.

Strangely it left me unable to log in to the hub saying someone else was already logged in, i had to reboot the hub to resolve this.

TROTER

13-03-2020 12:13

Re: Hub 3 firmware update.

Quote:

Originally Posted by SnoopZ (Post 36027014)

My hub now has 9.1.1811.401 as of 2am last night.

Strangely it left me unable to log in to the hub saying someone else was already logged in, i had to reboot the hub to resolve this.

Just checked and I also got (401) at 2am last night. Upstream power decimal place has not been corrected, sure someone said it had been.

Synthetic

13-03-2020 15:23

Re: Hub 3 firmware update.

Same here, cant see any changes but i'm in modem mode

All times are GMT +1. The time now is 17:55.

Page 1 of 3

Show 100 post(s) from this thread on one page