![]() |
BT to use Ntl/Telewest for calls
Just read this interesting article in the Telegraph. It is called Broadband Voice.
Would I be correct in assuming that this will only work with a SACAM. http://www.telegraph.co.uk/money/mai...frontcity.html |
Re: BT to use Ntl/Telewest for calls
No it works with a normal phone. AFAIK this already happens on some transatlantic voice calls and is used a lot internal within the US. I heard stories that it changes the sound of the voice and the call quality is lower.
|
Re: BT to use Ntl/Telewest for calls
If I read the article correctly it mentions a box that is supplied free, that plugs into the cable modem.
Qoute, "When customers sign up to the service, which costs £7.50 a month, they receive a box free of charge. They have to connect this to their broadband modem before they can start making calls." |
Re: BT to use Ntl/Telewest for calls
It is proven technology, in that it has been a big thing now for larger companies, with many offices perhaps multinational that have high bandwith connections. As I understand it systems are that well integrated that users in these organisations use their phone normally, but the kit then decides how to route it - VIOP or conventional. Companies even save money on international calls by using the mix of VOIP for the international bit with the remote office then auto dialling to the local standard phone network.
What I really like is the idea that BT can get one over on ntl & telewest who aren't forced like BT to open up their networks to other comapnies - after all if NTL can offer their phone / internet (dial up) service on BT, why shouldnt BT offer phone on ntl. I dont expect ntl to be too happy about it - lets watch the AUP for "it's not supported" type clauses, wait for the port blocking, and how much bandwidth does VOIP use - capping anyone? |
Re: BT to use Ntl/Telewest for calls
hmm, ok, you get savings on calls, but you have to pay £7.50 'line rental' for it... that is getting close to the cost of some of the 'talk unlimited' packages isnt it? ( talk unlimited is £9 on top of ntl phone line ... gives you "Free UK National and local calls every evening and weekend.
Daytime national calls at local rates †“just 3p per minute. Free International call plan worth £2 per month. " ) whilst I think the VOIP thing is great ( we have IP phones at work, and we have a 'trunk' to the US office so UK and US are effectively on the same exchange, so we can just dial extensions numbers, we can dial out via the us office to us numbers and only pay local rates, and us customers can dial into the us office and get put through to a uk extension and they only pay us calls ) I am not sure that the saving quoted justify paying, basically, an extra line rental and if it does, then one of the talk unlimited services may be just as good if not better. Whilst i agree about the 'why shouldnt bt be able to use ntl networks' why bother? how many houses DONT have a bt line? why dont they just drop the line rental to £7.50 or something... or offer to reconnect people for free even if some ntl tech has disconnected the bt phone line... |
Re: BT to use Ntl/Telewest for calls
Quote:
Looks like telewest have got their act together on this, and don't really see it as a threat: http://www.ispreview.co.uk/cgi-bin/n...AZVAlyoXzbTQfW I like the quote in that article: Quote:
"VOIP - what's that all about then - wer'e not tech enough to understand" :p |
Re: BT to use Ntl/Telewest for calls
Quote:
BBKing would be the one to answer or comment on my understandings because I bow down to his superior IP and Docsis knowledge, but here goes as far as I understand the issues. VOIP is a bolt on to the existing Cable modem Docsis system but requires the use of Docsis ver 1.1. ntl and Telewest currently use Docsis version 1.0, so as far as I understand it the system could not be implemented without an upgrade and changing out of the old CMX's if there are any left that will ot work on ver 1.1. The only exception to the rule would be original CWC areas because they alreay use Docsis ver 1.1, my understanding from a few years ago was that ver 1.0 only supports the transfer of data and not the timing aspects, this is OK for data but not for voice (data voice) as the timing is obviously critical. I seem to remember (Perhaps correctly, perhaps not) that one of the enhancements for ver 1.1 was the implementation of a QOS facility (quality of service) this would allow the VOIP traffic to be given priority over general internet data, and I guess would slow down surfing and downloading for all the cable modem users not making VOIP calls. The above info is as I remember it being described a few years ago when ntl started using the second phase cable modems, and I was also told at the same time that the Marconi/GPT system X switches had a bolt on facility to handle VOIP traffic, but I am not sure about the DMS100. I was suprised at this because I always thought the idea was to keep it away from the switch that was already working hard handling lots of SDH calls. Please forgive me if any of the above is incorrect or inaccurate as I would stand corrected if anyone has any more recent info, or knows if ntl have been spending lots of their spare cash quietly upgrading to Docsis ver 1.1 in all areas. Perhaps they already have a solution and are welcomng BT to use their network to provide cheap calls and take business away with open arms. :rolleyes: |
Re: BT to use Ntl/Telewest for calls
I think its a good thing anything that opens up competition in the market . Might even focus a few minds at NTL, but there again live in hope
|
Re: BT to use Ntl/Telewest for calls
Today I recieved a card from BT offering this service to me. How long will NTL allow such a service to run where BT are getting money from customers using NTLs BB.
Quote:
|
Re: BT to use Ntl/Telewest for calls
Quote:
I cant see NTL being too bothered really, if customers are using NTL Broadband, they are paying for NTL Broadband, im not to sure they would be that concerned about spin offs from BT |
Re: BT to use Ntl/Telewest for calls
Quote:
|
Re: BT to use Ntl/Telewest for calls
ntl & TW dont need to be told about this as its just using bandwith - you can get software VoIP software for the same thing for a while now.
|
Re: BT to use Ntl/Telewest for calls
Quote:
|
Re: BT to use Ntl/Telewest for calls
I use a great prog called skype from http://www.skype.com/ .
I was chatting to a friend who moved to Chicago a couple of days ago, and it was clearer than a phone line:D |
Re: BT to use Ntl/Telewest for calls
Quote:
|
| All times are GMT. The time now is 11:11. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum