|
Q regarding channel ID, power and speeds
Hi,
This may be a really dumb question but I'm gonna go ahead and ask anyway. When I was on 50Mbit and QAM64 I got 50Mbit on speedtest sites. Quite a while back now I noticed that I was moved over to QAM256. My power levels went quite high (from around 0dB to 13dB) but everything seemed fine. I added an attenuator to bring it back to around 0dB. Anyway, I've noticed that my downstream channels are not consecutive, ie, 158,157,159,160 and although it might just be me clutching at straws I noticed that on speedtest sites I only obtained around 30Mbit to 45Mbit speeds. Logically I assume they are simply channel names and nothing more rather than required to be consecutive (as I said its a daft thought, lol). Having upgraded to 100Mbit yesterday the engineer said that I should receive good download speeds.....we both laughed when I received 30Mbit!!! To be honest I wasnt happy but I thought I'd se how things went. The engineer stated that my actual area shouldnt be too heavily populated with subscribers too! Anyway, I ran 14 simultaneous downloads this morning which equated to around 12MB/s of downloads (great!) but why cant I see this speed on speedtest sites? I stopped getting full speed I'm sure when I was swopped over to QAM256 six months or so ago. I've also right now got 18dB of attenuation on the coax at the modem to give me a 0dB level? Should I require this amount really as it used to be around 6dB i the past. Superhub power stuff shown below (looks ok to me) Any help appreciated -------------------------------------------------------------------------------- Startup Procedure Procedure Status Comment Acquire Downstream Channel 443000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ -------------------------------------------------------------------------------- Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 158 55616000 Kbits/sec 443000000 Hz 0.0 dBmV 41.5 dB Hybrid Locked QAM256 157 55616000 Kbits/sec 435000000 Hz -0.3 dBmV 41.4 dB Hybrid Locked QAM256 159 55616000 Kbits/sec 451000000 Hz 0.0 dBmV 41.5 dB Hybrid Locked QAM256 160 55616000 Kbits/sec 459000000 Hz 0.0 dBmV 41.5 dB Hybrid Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown -------------------------------------------------------------------------------- Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked ATDMA 3 20480 Kbits/sec 45800000 Hz 42.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV -------------------------------------------------------------------------------- Primary Downstream Service Flow Downstream(0) SFID 10857 Max Traffic Rate 110000000 bps Max Traffic Burst 10000 bytes Mix Traffic Rate 0 bps -------------------------------------------------------------------------------- Primary Upstream Service Flow Upstream(0) SFID 18540 Max Traffic Rate 10250000 bps Max Traffic Burst 16320 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 16320 bytes Scheduling Type Best Effort |
Re: Q regarding channel ID, power and speeds
Quote:
|
Re: Q regarding channel ID, power and speeds
Hopefully you are disabling AV (specifically the web protection component) before using a speed tester.
|
Re: Q regarding channel ID, power and speeds
I dont have any AV on my system.
The power levels I constantly check to be honest and adjust accordingly. Like a said I used to have around a 6dB attenuator in place but when QAM256 got installed it shot up to 13dB and I had to use more attenuation. At no time did VM ever come around yet whatever they did it certainly changed my power levels. The last time I was looking inside the roadside cabinet was when I had 20Mbit and had all sorts of problems. Different power settings were adjusted in there back then and if they have changed since I was on 20Mbit I have no idea. That was a while ago mind you. It just amazes me that none of the speedtest sites ever show my full speed anymore even though it does appear I'm getting good 'actual' speeds when downloading. I'm a little reluctant to call techs in as I feel it'll just be a case of 'ignore the speedtest sites as they arent accurate in most cases'. Would just like to know why I cant see the full speed on them. Thx |
Re: Q regarding channel ID, power and speeds
Off the topof my head..............
Do you have an up to date version of java installed? Pop up blockers may have an effect. An AV you used to have and haven't uninstalled fully. If your download is working properly as verified by a site known to be capable of giving a throughput rate consistant with whatever tier you are on, usenet for instance, then the answer must lay on your machine or attached router perhaps. |
Re: Q regarding channel ID, power and speeds
Thanks for your info.
This machine (Win 7) has no AV or pop up blockers other than the Windows own stuff from WIN Update. It is very odd that I used to be able to get speedtest sites to show my speeds properly and not now. I also agree its strange that I can get good throughput from dl's too which does lead me to believe it could be something ultimately on this machine. I'm gonna hook up a Win XP machine shortly and do the same speedtests and see how that might go. Will post back if things look up :) Cheers Java normally gets updated whenever I see the message 'Java update available' on screen. At this moment in time I am using the Superhub as a modem and from there directly to my pc. With or without my gaming router attached so far has made zero difference. |
Re: Q regarding channel ID, power and speeds
Quote:
Quote:
Quote:
|
Re: Q regarding channel ID, power and speeds
I tried my XP machine which I use as a server only and scored 65Mbit on speedtest.net !!!! Tried again and back to 30Mbit, lol, and unable to get past it.
I'm not bothered by it as I know my actual speeds seem ok. On my Win 7 pc I updated Java and checked my Windows spam blocker thingy was disabled. It actually was already off anyway. I now think its something installed on my PC's which stop the speedtest sites from operating correctly. When Windows 8 comes out I'll install it and then retry and see what happens. Thanks. |
Re: Q regarding channel ID, power and speeds
Don't know if this is true or not, but some speedtest servers do not allow you to reach 100mb speeds.
|
Re: Q regarding channel ID, power and speeds
Yes, that is true but the one I used to use and get reliable results on was speedtest.net and that one does cater for 100Mbit.
I'm trying to find out why it doesnt show up thats all as I do get the full 12MB/s or so using multiple downloads. ---------- Post added at 21:54 ---------- Previous post was at 21:44 ---------- Hmmm, not too sure whats just happened but I used the TCP Optimizer utility and set it to OPTIMAL settings. Rebooted, went to the Newbury test site and achieved 74.67Mbit down and 7.24MBit up (normally Upload speed is 9.2Mbit on London tests). So, it looks like you at least have to just keep trying different servers until you hit the right one that works for you, lol, makes little sense really but hey, at least I can see 75Mbit at least! |
Re: Q regarding channel ID, power and speeds
there is extra factors on speedtest.net
it goes via flash which adds significant cpu requirements. also VMs peering is dodgy and could be affecting some speedtests, certianly namesco is capable of far higher than 100mbit as I have tested it with servers hitting 700mbit/sec. rWIN may also affect it although with it been 4 threads I wouldnt expect it to have a significant effect on the 10mbit service. On old operating systems tho it can easily affect it on any other tier. As a rule of thumb if things feel laggy/broken or my net has been dodgy anyway I will do a speedtest on speedtest.net. If the test is slow I will then see if it gets backed up by manual downloading (usually of multi gigE servers I run). 95% of the time its accurate, occasionally its not and thats usually down to VM peering or core network issues. |
Re: Q regarding channel ID, power and speeds
Since last night I have tried new settings, cleared cache, checked this and that. Put settings back to default abd also the 'optimized' ones for TCP etc and I get the usual 30mbit. Some servers give me 1Mbit (lol).
Back to how it was but actual dl's are still fine. |
Re: Q regarding channel ID, power and speeds
well in your case for whatever reason speedtest.net isnt showing you the capability of your connection speed although its highlighting a problem somewhere.
|
Re: Q regarding channel ID, power and speeds
Yeah, Namesco is one of the better UK ones.
Incidentally, most of the ones in the UK seem limited to ~100-200mb while most of the ones on the continent seem to be 1gbps. |
Netcetera also seems good think that's a newer addition but I get good results
|
| All times are GMT. The time now is 18:47. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum