Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   Superhub : Upgrade to 50Mb vm300 (https://www.cableforum.uk/board/showthread.php?t=33684333)

MPH 03-01-2012 16:20

Upgrade to 50Mb vm300
 
Hi all I have a couple of questions I hope someone can help me with..

I have previously been on 50Mb with the vm300 modem then downgraded to 30 when the new £18.50 tariff came in .. want to give 50Mb ago again so have an engineer booked in a couple of weeks.
I am a pretty regular reader of this forum & have read no end of problems associated with the suberhub.
As I understand the R30 firmware has fixed some of this issue but I want to know where I stand with requesting I hold onto the wm300 modem in case I have any issue moving forward.. I currently use a Netgear N600 router which I find excellent, if all else fails will the superhub in modem mode be exactly the same as my current wm300/N600 setup??
I also run a windows home server (2011) on this setup I wonder if anyone else is running a superhub
With WHS without issue?

Any advice would be appreciated

Cheers

thenry 03-01-2012 16:27

Re: Upgrade to 50Mb vm300
 
whats your power levels like mate? if there within spec call 150 > 1 to confirm your account > 5 > 2 'thinking of leaving' - tell them to cancel your tech upgrade booking and to upgrade you over the phone.. once they do the upgrade from their end reboot your modem and you should be away with 50Mb

that said more channels are being put on BB services so you'll need the SH at some point.. not sure though, theres better personnel on here that can answer whether thats coming quicker than expected.

Sephiroth 03-01-2012 18:51

Re: Upgrade to 50Mb vm300
 
The chances are that the engineer attending your 50 meg upgrade will give you a SH (put it Modem Mode as you suggest) and will take the VMNG300 away saying it's VM's property.

In modem mode, the SH should behave as well as the VMNG300.

Peter_ 03-01-2012 18:54

Re: Upgrade to 50Mb vm300
 
As the rollout to 8 downstreams gathers pace the is little point trying to hang onto outdated equipment when the Superhub in Modem Mode is equal if not superior in performance.

Chrysalis 03-01-2012 19:42

Re: Upgrade to 50Mb vm300
 
When I see this pace I will switch, until then I keep what I got. My area is still on 4 channels not even 5 yet.

morley04 03-01-2012 21:53

Re: Upgrade to 50Mb vm300
 
When I had the Super hub up and running I was seeing 5 Channels in the LE3 area.

Chrysalis 03-01-2012 22:43

Re: Upgrade to 50Mb vm300
 
I am waiting for the signs that work has been done, its not on my port yet.

craigj2k12 03-01-2012 23:18

Re: Upgrade to 50Mb vm300
 
when my line card was swapped, i got quite a long outage, I had to power cycle the modem to connect, I then had a whole new set of channels, both up and down, as well as a new IP

MPH 04-01-2012 08:43

Re: Upgrade to 50Mb vm300
 
Thanks the the reply’s all sounds promising then .. I believe I'm on the Hayes UBR so as Masque pointed out I assume they will be upgrading the number of channels so I guess I'm fighting a losing battle trying to hold onto the older tech.
While I don't think I need more than 50Mb down I can always use a faster upload speed ( I use the WHS a lot to pull data off while at work etc.) see how it goes in a couple of weeks.

Chrysalis 04-01-2012 09:08

Re: Upgrade to 50Mb vm300
 
Whilst its inevitable channels will be at some point upgraded it doesnt mean its going to happen soon, My main issue is that every single time I have used the superhub my jitter has significantly moved upwards. So for me to switch back would either be if I am forced to by VM or I see hideous download speeds.

davidthornton 09-01-2012 23:34

Re: Upgrade to 50Mb vm300
 
If you're on 100Mbit with a VMNG300, how will you know if/when your UBR has been upgraded to use more than 4 channels? Loss of speed?

Sephiroth 09-01-2012 23:49

Re: Upgrade to 50Mb vm300
 
You'll be provisioned according to your modem. It is tempting to suspect, however, that VM might ensure that only SHs are present for DOCSIS 3 use to maintain some sort of symmetry on the bonded channels.

But given the unpredictability of what people do with their bandwidth, it seems hardly to matter to me.

Maybe Igni thinks otherwise.

thenry 09-01-2012 23:55

Re: Upgrade to 50Mb vm300
 
what do you mean seph?

craigj2k12 09-01-2012 23:58

Re: Upgrade to 50Mb vm300
 
Quote:

Originally Posted by Sephiroth (Post 35358208)
You'll be provisioned according to your modem. It is tempting to suspect, however, that VM might ensure that only SHs are present for DOCSIS 3 use to maintain some sort of symmetry on the bonded channels.

But given the unpredictability of what people do with their bandwidth, it seems hardly to matter to me.

Maybe Igni thinks otherwise.

nope, i was using VMNG when 5 downstreams were available, it was my own choice to activate the superhub

Chrysalis 10-01-2012 02:09

Re: Upgrade to 50Mb vm300
 
Quote:

Originally Posted by davidthornton (Post 35358204)
If you're on 100Mbit with a VMNG300, how will you know if/when your UBR has been upgraded to use more than 4 channels? Loss of speed?

I would expect an outage and power level changes.

Also it helps if you know someone with a superhub on the same port as you.


All times are GMT. The time now is 13:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum