Speed and ping way low today DN35
 

0.37Mb/s dl, 0.365Mb/s up and ping is 1017ms, anyone else? 10Mb/s normally.

Re: Speed and ping way low today DN35
 

That ping isn't low

Re: Speed and ping way low today DN35
 

Fixed itself after a modem reboot and computer restart.

And it just got worse;
https://www.cableforum.co.uk/images/...011/06/160.png

Re: Speed and ping way low today DN35
 

modem stats?

Re: Speed and ping way low today DN35
 

Getting different speeds each time at the moment, strange;
https://www.cableforum.co.uk/images/...011/06/158.png
https://www.cableforum.co.uk/images/...011/06/159.png

Re: Speed and ping way low today DN35
 

Modems stats?

Re: Speed and ping way low today DN35
 

?

Re: Speed and ping way low today DN35
 

http://192.168.100.1

click on the links 'downstream' and 'upstream' and copy and paste the info from there

Re: Speed and ping way low today DN35
 

Stats;

Cable Modem Information
Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant
MAC Address : removed
Serial Number : removed
Boot Code Version : 1.1.2c
Software Version : 2.111.1002
Hardware Version : 1.9

Cable Modem Status
Item Status Comments
Acquire a Downstream Channel 315000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 195
Downstream Frequency : 315000000 Hz
Downstream Modulation : QAM256
Downstream Symbol Rate : 6952 Ksym/sec
Downstream Interleave Depth : taps12Increment17
Downstream Receive Power Level : 10.5 dBmV
Downstream SNR : 39.8 dB

Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 4
Upstream Frequency : 45800000 Hz
Upstream Modulation : QPSK
Upstream Symbol Rate : 5120 Ksym/sec
Upstream transmit Power Level : 44.7 dBmV
Upstream Mini-Slot Size : 4

Cable Modem Operation Configuration
Network Access : Allowed
Maximum Downstream Data Rate : 10240000
Maximum Upstream Data Rate : 1072000
Maximum Upstream Channel Burst : 8160
Maximum Number of CPEs : 1
Modem Capability : Concatenation Enabled, Fragametation Enabled, PHS Enabled

Re: Speed and ping way low today DN35
 

downstream power quite high, should be causing any problems though. The upsteam modulation is on QPSK which indicated a problem network side, buts thats about all I can see from those stats

Re: Speed and ping way low today DN35
 

Downstream power level; is too high, you need a tech out to adjust it.

Re: Speed and ping way low today DN35
 

I read 'Ambit 256 modem is spec'd for downstream in the range -15 to +15 dBmv', this is the modem I have here.

The little green graph on the Speedtest is all over the place, not steady like it used to be, ie it's spiky.Makes me wonder if someone has been in the street cabinet again, the phone side was disconnected recently. :(

Re: Speed and ping way low today DN35
 

As you know better feel free to ignore my post.

Re: Speed and ping way low today DN35
 

I was copying and pasting that info while you posted, hadn't seen your post before I posted that. I appreciate your help.
Latest test graph;

Re: Speed and ping way low today DN35
 

just ring virgin, i think pip is resorting to alcoholism at the moment he is having mood swings like a pregnant woman. either way you will need to ring virgin, then they will tell you if there is an area fault or a power level problem

Re: Speed and ping way low today DN35
 

What the Ambit256 is spec'ed for is immaterial. The pertinant issue is what the VM network is spec'ed for. A read of THIS will be helpful to you.

Re: Speed and ping way low today DN35
 

however masque say they work to +11 now, probably trying to save money on techs

anyway a power level of 10 will not cause the problems the OP is having

Re: Speed and ping way low today DN35
 

Time for a drink then!!!:D:D:D

Re: Speed and ping way low today DN35
 

That's the page I got the information from; CABLE MODEM NOMINAL SPECS

Thing is why today? Worked OK before, I'll get on to VM tomorrow.

Thanks all.

Re: Speed and ping way low today DN35
 

As I have said many times you have to have to rule out the obvious first, it's a logical progression.

2nd line on VM's website would book an engineer out first before trying to diagnose further.

Quite a few of the beloved VMNG300s refused to lock on to a downstream above 7dB. The higher spec Masque refers to could be hub specific. We are not discussing a hub here though.

---------- Post added at 22:25 ---------- Previous post was at 22:24 ----------

That is a page from where? It's not a link to it. Try THIS one.

Re: Speed and ping way low today DN35
 

lets all get smashed and have a big argument

Re: Speed and ping way low today DN35
 

Hugh would only step in and put us in the sin bin for 24 hrs.:D

Re: Speed and ping way low today DN35
 

id need at least that in recovery time :D

Re: Speed and ping way low today DN35
 

That is the heading from the page you linked to, which said
the Ambit 256 modem is spec'd for downstream in the range -15 to +15 dBmv

Choosing a different server now on Speedtest is giving a lot steadier graph.
https://www.cableforum.co.uk/images/...011/06/156.png

Re: Speed and ping way low today DN35
 

You didn't carry on reading though did you?

"At this point, more needs to be said about the downstream. As most of you know, the downstream RF signal is is QAM modulated (which you can read about here). High power levels can cause QAMs around the tuned one to break through the tuner's isolation and interfere with the intended signal.

RECOMMENDED POWER LEVELS



Bearing in mind the above explanations, it should be clear why the following levels are recommended. They take into account



the modem's specifications
the technical explanations provided above
the anecdote on the forums as to where problems arise
the values based on geography (i.e. network build) recommended by Virgin Media staff



DOWNSTREAM POWER (Optimal)



Rule of thumb: -3 dBmv to +6 dBmv



The above advice compares with the VM stated optimum values by region (according to implemented infrastructure standards) and modulation:

QAM64 (Knowsley networks) -7 dBmv to +3 dBmv

QAM64 (Langley/Bromley) -10 dBmv to 0 dBmv

QAM256 -3 dBmv to +7 dBmv



This is not cast in stone. A good modem (Cisco 2100 comes to mind) can handle nearer the DOCSIS spec if the level is steady and the experience good. If the experience is bad, then look for high downstream power, particularly above the 9 dBmv mark."

Re: Speed and ping way low today DN35
 

OK, so if the level is too high, would the CM stop working altogether or would it cause the spikes in the download speed shown in the graph?

Re: Speed and ping way low today DN35
 

Certainly, as mentioned above there were many VMNG300s that refused to lock onto the primary downstream channel above 7dB therefore -no service.

Plus there is this.- High power levels can cause QAMs around the tuned one to break through the tuner's isolation and interfere with the intended signal.

I don't think it's necessary to get any deeper into it. Suffice to say until the power level is rectified further investigation is pointless.

Re: Speed and ping way low today DN35
 

Just a thought but have you installed anything new on your pc lately? The reason I mention it is because I switched from Virgin's AV to another security solution just last week and my connection speed went down the swanee much like yours.

I realise this is a basic question but sometimes we do go off looking for complicated answers to simple problems.

Re: Speed and ping way low today DN35
 

Hi, I updated Malwarebytes to the latest version yesterday but I don't normally have that running. The speed and ping were up and down every few minutes, some web pages took ages to show and news video kept buffering.

Re: Speed and ping way low today DN35
 

Can't see MWB causing any problems.