Copying from V+HD box to VCR.
 

I have copied programmes from my V+HD box onto video tape..but..alas...no sound??????
Can anyone throw some light as to why and how to remedy this...please.please!!

:confused:

Re: Copying from V+HD box to VCR.
 

Check the SCART leads are plugged in fully. Do you get sound if you play back a pre-recorded VCR?

ps. Welcome to the forum!

Re: Copying from V+HD box to VCR.
 

Hi Spiderplant
Thanx for the welcome.

Checked the scart leads,seem to be OK.No sound on pre-recorded tapes...although will check that again to be sure..

I have been told that may need to put a coaxial cable from V+ HD box to tv.(where outdoor ariel used to be.)

What do you think?

Re: Copying from V+HD box to VCR.
 

Do you really mean that? If so, that rules out there being no sound from the V+. It's a problem getting sound from the VCR to the TV.

How do you have it all connected? You shouldn't need a coaxial lead.

Re: Copying from V+HD box to VCR.
 

Scart from V+Box to VCR
Scart from VCR to TV
HDMI lead from V+ to TV

Not yet got around to checking pre-recorded tapes again...busy with Xmas preps.

If and when I get the sound sorted,will I have to re-copy my programmes from V+ box?
:)

Re: Copying from V+HD box to VCR.
 

Scart from VCR to v+ scart from v+ to tv and hdmi from v+ to tv is my preference

Re: Copying from V+HD box to VCR.
 

Have you changed the SCART from VCR to TV recently? Sometimes some SCART leads do not have all the pins (or a pin is broken).

Re: Copying from V+HD box to VCR.
 

First,do have sound on pre- recorded videos.

Regards to scart leads...had to mess around with them to get it to copy from V+HD box..as could not get it to even record at first.

So,a big possibilty of damage to pins but surely if there is..would not work at all!!!

Driving me mad...picture but no sound...:mad:

Re: Copying from V+HD box to VCR.
 

SCART leads have separate pins for audio and video, so it's possible that only the audio ones are broken. But it's stereo, and it's unlikely that you'd lose both the left and right pins.

Time for some fault finding:
First temporarily unplug the HDMI lead at one end. Doesn't matter which end.

Then connect the V+ direct to the TV by moving the SCART plug from the VCR to a spare socket on the TV. Select that input using the TV remote (button may be labelled AV, EXT, Source or have a picture of a TV screen with an arrow in it). You should be able to see the current channel from the V+. Can you also hear the sound?

If you can hear it, that means the V+ and SCART lead are ok. The fault probably lies in your VCR. Maybe you need to change its settings. (What model VCR is it? I'll see if I can find the manual online)

If you can't hear anything, either the SCART lead or V+ is faulty. Replace the SCART lead with a different one and repeat the test. If you now get sound, you know it was a bad lead. If you still have no sound, the V+ is faulty, and you should ring VM.

Don't forget to reconnect the HDMI lead when you've finished.

Re: Copying from V+HD box to VCR.
 

Hi Spiderplant
Wow,what a comprehensive reply!!!
Will try other scart leads,have a couple of spare ones.

What I cannot understand is why can I watch TV ok..no problem there,are we only using scarts to connect to VCR/DVD Player to TV to be able to use them...you must think me rather dense...:dunce:

My DVD Player/VCR :
TOSHIBA
SD-38VBKB

Had it about six years and have the user manual.

Oh Lord,don`t fancy having to fiddle abut with settings etc. bound to make a hash of it.:(

Re: Copying from V+HD box to VCR.
 

When you watch TV directly, the sound (and picture) goes along the HDMI lead. So it isn't using the SCART leads at all then.

Ok, I've found the manual. Don't panic - there aren't any settings you could get wrong.

Make sure the SCART lead from the V+ is plugged into the top socket on the back of the VCR. The TV should be connected to the bottom socket.

On the V+ you should use the "VCR" SCART socket. That's the top socket if your V+ was made by Samsung, or the bottom one if it is Scientific-Atlanta.

Re: Copying from V+HD box to VCR.
 

Thank You for going to all this trouble for me...it is much appreciated.:)

Will check my scart leads later on.If that doesn`t do the trick we will have to assume it is either faulty leads or the V+ box which is, by the way, Samsung.

Will let you know how I go on...

Re: Copying from V+HD box to VCR.
 

Hi Spiderplant
Tried putting the scart leads you told me....it did not record(copy) at all!!!!!

Nothing...so put them back as they were,copied OK ...no sound:mad:

What to do:confused:

Don`t know if worth ring Virgin Media as I have found that most of the time,the left hand ...etc .

Oh dear...

Re: Copying from V+HD box to VCR.
 

Did you try connecting the TV directly to the V+ using SCART to see whether you got sound?

Re: Copying from V+HD box to VCR.
 

Hi
Do you mean an extra scart cable?
Should I put the cables back to how I had them and was able to copy(without sound) cos the way you told me I cannot copy at all.

The way I had them:
Bottom scart socket on V+ to bottom VCR.
Top scart socket VCR to top socket TV.

So shall I put another cable from V+ to TV? Worth a try.

Re: Copying from V+HD box to VCR.
 

Ok, I think that's the problem.

You need:
Top SCART on V+ to top SCART on VCR.
Bottom SCART on VCR to TV.

I know you said it didn't work, but try again. Bear in mind you'll need to select a different input when recording on the VCR. I think you VCR calls it "L2".

Re: Copying from V+HD box to VCR.
 

Hi
I think I read in the user manual L1.
Plus when the technician came with the box,he definately said L1.

So,you are saying to put the scarts back to the way you told me the other day,which I did tried and it did not copy????

Will try on L2.

Re: Copying from V+HD box to VCR.
 

Would this help? :shrug: http://www.cableforum.co.uk/board/34837803-post3.html

Re: Copying from V+HD box to VCR.
 

Yep, but you need to select L2.

Maybe. The second drawing is the one SOLADA needs.

Re: Copying from V+HD box to VCR.
 

I had this problem before and as spiderplant has pointed out i had to select A2 on my vcr to copy, so you may need to try L2 ( and it works with the HDMI cable plugged in as well ). Hope this will help you:erm:

Re: Copying from V+HD box to VCR.
 

Thanx everyone for responses.
Will try with L2,set up as you have previously told me,Spiderplant,
If still doesn`t work,will try your suggestion,Ben B.:)

Re: Copying from V+HD box to VCR.
 

Ben B's suggestion is the same as mine. Just a picture instead of words. :)

Re: Copying from V+HD box to VCR.
 

Spiderplant,am not favouring Ben B`s advice over your`s.did not realise that they are the same as have not had a go at his yet.

I appreciate all the info. you have given me ...

I am really beginning to think that it could be the scart leads...am going to have another go now...fingers crossed!!!:)

Re: Copying from V+HD box to VCR.
 

Still not working ...will have to leave it until after Xmas when I may ring VM,

So will wish you a :xmas: and will be back in touch in January