![]() |
Economy 7 Immersion Heater Help.
I wonder if any of u guys can help me.
I have an econemy 7 immersion heater and its been problematic since day one when i moved in... In the 2 years ive been here its been repaired 16 times, 2 years ago it had 2 new elements and 4 new thermestats and today now its had another 4 new thermestats. Whats happening is when they fit them they r fine until they switch power on and then they trip out and from then on it has to be on maximum to get any sort of hot water what so ever. The electrician today has stated that all it can be is the element and the tank has to be drained AGAIN! and 2 new elements placed in it AGAIN! Its really starting to stress me out now, before i moved in it was supposed to have been changed and never was and even when i moved in wasnt working and i feel as if im being messed about. Can anyone shed any light on this? |
Re: Econemy 7 Immersion Heater Help.
Quote:
|
Re: Econemy 7 Immersion Heater Help.
I've seen lot of heating elements that were DOA, or fail withing the first few hours of use. Checks showed that suppliers were being duped into buying counterfeit items through a wholesaler... less cost to them, big cost to the user.
|
Re: Econemy 7 Immersion Heater Help.
This is the type of 'Incoloy' element I used very successfully:
http://www.qvsdirect.com/3kW-Incoloy...-pr-18335.html If hard water isn't your problem then dodgy parts or some problem with the installation seems the most likely reason. |
Re: Economy 7 Immersion Heater Help.
Apparently they are coming tomorrow to drain the tank and fit two new elements.
|
Re: Economy 7 Immersion Heater Help.
Quote:
|
Re: Economy 7 Immersion Heater Help.
To think that the hardest part about changing an element is removing the old one.
10 years is the expected life of an element, thermostat can't predict on lifespan. As has been said earlier incalloy is the prefered material for elements because of its chemical resistance. (I have one element (base of tank) still o'k after 20years but lost count on No of thermostats that have been fitted). Point to remember hard water plus to high a temperature shorten life of element, (read the instruction leaflet for stat 60°C max) |
Re: Economy 7 Immersion Heater Help.
Surely, where Economy 7 water heating is the sole source of hot water, it's far more demanding on the elements than where an immersion heater is just being used to supplement the hot water provided by, say, a gas boiler. Perhaps not a surprise that the elements need more frequent replacement then?
One other thing. IIRC copper cylinders are supplied with an internal sacrificial anode which is supposed to limit the effects of corrosion inside the tank. Before we had our E7 system ripped out, I noticed the anode inside the cylinder had been completely eroded away over the years and I'm wondering if this is what caused the gradually increased frequency of problems we had with failing elements over time. The cyclinder we had was a very large on and the hardest part of the job for me was draining it in order to access the elements (hose pipe into cylinder and suction to drain the water). If tradesmen are doing likewsie and charging hourly (which most do) I wouldn't be surprised if they quite like a nice easy immersion heater job... ;) |
Re: Economy 7 Immersion Heater Help.
2 new elements and 2 new thermistats today. The Thermistat worked for 6 mins in the booster immersion and died Now waiting for them to see if they can come back out today.
|
Re: Economy 7 Immersion Heater Help.
Quote:
The heaters are a nominal 3Kw = 12 amps load The thermostats are 15amp switching capacity Unless they have picked a foreign make, that should have been o'k. |
Re: Economy 7 Immersion Heater Help.
Quote:
Well hopefully its done now.... 2 new elements and 3 new thermastats just got to wait till the morning now to see if the Econemy 7 Works. I hope no one was listening by my door when the plumbers were draining the water... The drainage valve on the bottom wouldnt open so they had to drain from top of tank, u had one plumber by the tank and the other one in the bathroom sucking on a hose saying "This is discusting its hitting the back of my throat and gagging" and then u had the plumber by the tank saying COME ON SUCK IT SUCK IT!. |
Re: Economy 7 Immersion Heater Help.
Well the booster part when u run out of hot water on the econemy 7 isnt working properly and needs to be looked at again. Was on for 95 mins and give me about 4" of hot water in the bath before going freezing cold again.
This will be the 19th time tommorrow that its been looked at in 2 years. |
Re: Economy 7 Immersion Heater Help.
Is this a council property?
If so I would be speaking to someone with a loud voice. Housing association likewise would be getting a tongue lashing. Its just unbelievable that something like this is happening today. (As a retired electrician this should not happen, words fail me.) |
Re: Economy 7 Immersion Heater Help.
This all seems very odd to me. Are the guys doing this work competent and trustworthy? Have the same people always done the repairs or have different companies and suppliers been involved? :confused:
If I was paying for all this nonsense I'd be hopping mad! |
Re: Economy 7 Immersion Heater Help.
Quote:
Before i moved in back in Nov 2008 i was told the tank was gonna be replaced and a few other jobs were due to be done. They kept the keys for 6 weeks and NO! jobs were done, The immersion still wasnt working when i moved in, they were supposed to have painted the place before i moved in as its a Housing association property and they didnt do that, they told me the radiators were leaking and were gonna be changed yet they r storage heaters so how can they leak? and this is why i put in a complaint with the ombudsman and it was upheld back in 2008 ---------- Post added at 13:42 ---------- Previous post was at 13:38 ---------- Quote:
My electric heater wasnt working in the bathroom and i told the electrician the element was going and he said i quote "no its not, i have been doing this job for over 10 years, u can turn them up inside". He took the cover off the heater, did something turned it on and there was a loud bang, a blue flash and it took 2 days to get the smell of singed plastic out of my flat. i said to him "well if u have been doing this for 10 years i think u best find another vocation". ADMIN EDIT (CHRIS): The swear filter is there for a reason. Please don't try to dodge it by selectively *ing out words. |
Re: Economy 7 Immersion Heater Help.
Please mind your language and do not attempt to dodge the swear filter.
|
Re: Economy 7 Immersion Heater Help.
Given what you've said I think I'd contact my local newspapers about all this. It's a serious safety issue and hopefully they'll be interested enough in what's going on to take up the matter with your HA. If there are other HA owned properties nearby I'd also knock on a few doors and find out if their occupiers have been having similar problems with the contractors. If you can get some support to back up your claims that wouldn't hurt your case.
|
Re: Economy 7 Immersion Heater Help.
The water locally is extremely hard.
When I worked as a self employed plumber I would highly recommend corrosion resistant elements to the extent of refusing to offer any guarantee if the customer insisted on a cheap job. I also did work for some property management companies. They unanimously insisted I fit the cheapest copper elements I could source and accepted my policy of not guarantying them, although that did not stop them moaning when they failed within just a few months of being fitted. Even using corrosion resistant elements, any element life after 12 months is a bonus in this area. Thermostats were rarely a problem. |
Re: Economy 7 Immersion Heater Help.
Quote:
I have been in contact with the Housing ombudsman again who are sending me a complaints form also. My Housing officer and the electrician is coming back out tomorrow to see if the econemy 7 heats tonight and it didnt last night and the electrician said theres nothing he can do as all voltages now checks out and it could be a problem with Swalec my electric supplier which is rubbish and he also said changing the tank wont make a difference and they havnt even tried as this was supposed to have been done 2 years ago. ---------- Post added at 18:01 ---------- Previous post was at 17:58 ---------- Quote:
|
Re: Economy 7 Immersion Heater Help.
It is a shame you live so far away from me in Yorkshire.
I would have checked/replaced as required and confirmed system worked before I left. Does the booster work at all? (All this does is provide a 'timed electrical supply' direct to upper element) Brian |
Re: Economy 7 Immersion Heater Help.
I left the booster on for over an hour and a half last night and it give me about 3" of hot water in the bath... When it was working fine i only needed to leave it on for about 30 mins and got a full bath full..
The electrician said he cannot help the ammount of hot water it gives he has done his job.. As i said to the housing officer at the end of the day they have a duty to fix it to a reasonable working standard even if it means changing the complete tank for something different. I was told theres something called a Non Vented system or something they could try instead but the housing officer is unwilling to spend out and this is one of the largest housing associations in South Wales. He will soon have a shock when a second Complaint is launched with the Ombudsman. Its also started affecting my health, i suffer from stress and anxiety and ive started having palpitations again to a point i was forced to have an ECG today and waiting for results and have been put on beta blockers. |
Re: Economy 7 Immersion Heater Help.
There is nothing wrong with E7 water heating - it's a very simple system, if a little expensive to run compared to gas. We had E7 water heating for over 20years and the only issues we had were the elements periodically failing. If you're in a soft water area there must either be something wrong with the basic installation, the work being done and/or the parts being used. There's so little which can go wrong any decent professional ought to be able to sort it out. It's a potential health/safety issue and I still think the newspapers are the way to go - a critical piece in the local rag ought to embarrass the HA to get their finger out and might be far quicker than just relying on the formal processes you've started.
One other thought, you've mentioned the problem with the Boost setting but what happens when the main element is on overnight to heat the whole tank? Do you get a full tank of hot water in the morning or just the same small amount because of the same problems with the element/thermostat? Keep us posted. |
Re: Economy 7 Immersion Heater Help.
when working my E7 heating and water is more efficiant and costs less than my parents who have Gas.
Seems as tho now the problem is fixed touch wood i had piping hot water for the first time in 3 weeks almost so i have just got to keep an eye on it now for a few days to make sure all is well. Apparently according to the electrician the problem was and i quote which im not taking the micky here he said that proberbly "your flat must be haunted". Im thinking of writing a book on it called "The Pantom of the Immersion Heater". The Phantom does nothing at all except adjusts ur thermostat when ur asleep. |
Re: Economy 7 Immersion Heater Help.
One last question for you Chris!
Can you advise on what temperature the 2 thermostats have been set to. (Should have a isolation switch adjacent to each of the 2 heaters, switch off to prevent accident) Removing the screw/nut holding the cover in place, look at the setting @60/65°C. Replace cover then switch back on power. |
Re: Economy 7 Immersion Heater Help.
It's been years since I worked on these but I'm sure I remember that the Boost option is a timed 1 hour activation. I also remember a full tank/half tank setting courtesy of an element positioned halfway up the cylinder as opposed to the one positioned at the base of the cylinder.
Re: Your 3 inches of hot water after using the Boost. Is it possible that only the half tank element is energised when boost is enabled. IIRC that boost is only intended give enough extra HW for washing up or hands & face washing etc. IIRC one bath about empties the whole tank. |
Re: Economy 7 Immersion Heater Help.
On economy 7 installations the boost (is now) provided by a push button switch.
(Push 1/2 -1 -2hr depending on how many times button is pressed) With the boost element positioned vertically at top of tank. Depending on length of element determines band of hot water at switch off temp. (I used 11 inch for both top/side entry elements) |
Re: Economy 7 Immersion Heater Help.
Thanks for the heads up.
It looks like we don't really have enough information to diagnose what might be going on with Chris's system. :( |
Re: Economy 7 Immersion Heater Help.
Quote:
There r no temp marks on it just - and + at other end and then a thick white dot marking out the default temp. |
Re: Economy 7 Immersion Heater Help.
A final heads up on water heaters.
Be aware that if you have the new style 1/4 turn taps (ceramic cartridge instead of rubber plug), the ceramic faces are only for use up to 65°C. (Just changed a hot water cartridge after it had been damaged by very hot water, just 2years old)!! At 8 pounds per cartridge, it was an expensive hot water system |
Re: Economy 7 Immersion Heater Help.
Again im having problems with this but dont know if it was just a one off so i will give it the benefit of the doubt for now but if it carries on will contact the housing association.
2 days ago i realised i didnt have hot water which should have heated over night and discovered the thermistat had tripped so i reset it. I decided also as the water was a bit hot to turn it down so i moved it 1/2 a notch clockwise which the arrow went towards the -. Now either 1... I am being totally thick and did it wrong or 2 the thermistat may have a problem as the water now is even HOTTER! i mean to a point u cant even wash ur hands under the tap after going to the loo. I have to instead fill the sink and add cold each time otherwise it will take the skin off ur hands. anyone tell me what it is lol |
Re: Economy 7 Immersion Heater Help.
Broken thermostat hence the overheat protection tripped..
|
Re: Economy 7 Immersion Heater Help.
this is the thermostat thats in there...
http://www.websparky.co.uk/acatalog/info_BAK07.html So i am right in thinking that the arrow goes towards + to make hotter and - to make colder? lol |
Re: Economy 7 Immersion Heater Help.
Quote:
|
Re: Economy 7 Immersion Heater Help.
Quote:
Turn the power off and call in whoever normally maintains it. |
Re: Economy 7 Immersion Heater Help.
If you get desperate for hot water, switch the heater on at say 6.00am.
The heating system is set for 7hrs heating from 12.30am till 07.30am. (So at least you get 11/2hrs (one and half hours) of hot water) Remember to switch back off, don't allow it to heat up overnight! |
Re: Economy 7 Immersion Heater Help.
Econemy 7 is meant to heat up overnight.
I spoke to the electrician who repaired it today he was on sight replacing some bulbs in the lights in the communal garden and he stated that its ok to carry on using as if the thermistat is faulty it will just keep tripping and if it happens again just ring the office and either he or this really gorgous one whos been here before who looks like chase crawford will be out to fix it. I hope its the Chase Crawford one i always sneek a peek when hes working lol |
Re: Economy 7 Immersion Heater Help.
Hmm - normally, clockwise turns the temperature up.
|
| All times are GMT. The time now is 07:37. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum