![]() |
Our Dyson's died!
We have a DC05 that has just died. The fuse in the plug is okay but nothing whirrs.
Anyone know how to get in to the damn thing? |
Re: Our Dyson's died!
Quote:
Just an idea. Dunno about taking it apart tho. |
Re: Our Dyson's died!
Quote:
It took ages before it reset, as well - nearly 2 hours IIRC. |
Re: Our Dyson's died!
It's also worth noting that if any of the air filters (hepa filters) are blocked, the Dyson will shut down.
|
Re: Our Dyson's died!
You could get the dodgy new one with the big ball at the bottom.
|
Re: Our Dyson's died!
Yes, I Killed our DC07, we were having lots of building work done and I used it to vac up all the builders dust.
Warning: Don't use you Dyson to vac up fine dust. It lost suction and kept overheating. I stripped down the top of it were the cyclones are formes and found it all blocked with plaster/cement dust that had hardened. I cleaned it all out but it wasn't the machine it used to be. It kept cutting out and last month finally died. So I bought another one, same model only £150 - BARGAIN. Forget about trying to get into the motor. |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
Yep, leave it to cool down for a couple of hours, make sure the filters are clean, if not then best let it go to that vacuum cleaner heaven in the sky :cry: |
Re: Our Dyson's died!
Quote:
We had this problem with our DC07 Animal - no loss of suction pah. You need to pull the filters out and wash them or replace them - most Dysons have washable filters. The blue one once soaked the water was running like sloppy plaster out of it. Dry them on a radiator and hope the thermal cut out cuts in. How old is it - they come with a two year wwty as default. |
Re: Our Dyson's died!
Getting into them normally just requires a set of star bits, you know, the type manufaturers use to keep us out of their equipment but unfortunately you can by from screwfix etc ;) Not that I've ever had to get inside a Dyson to rewire it after someone yanked the lead once too often :angel:
|
Re: Our Dyson's died!
Quote:
Like our DC05 did... :mad: After the amount of hassle that thing gave us, I was quite happy to replace it with a Vax upright (£99.00 at Tesco), which has all the features of the Dyson, doesn't seem to lose suction much and is also far more powerful than the dyson. The downside is it sounds like a hovercraft (and if you've ever been to Dover, you KNOW how loud those are). |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
why why why do they insist on trying to get to the bottom of the garden :D |
Re: Our Dyson's died!
Ours blew up big syle!!! So I am not allowed to touch hoovers!!!! as I can blow them up very easily!!!!!!
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
:redcard: |
Re: Our Dyson's died!
We ended up replacing ours with a morphy richards and i have to say it is a much better hoover and is more powerful. I am never going to get another dyson again!!!
|
Re: Our Dyson's died!
I wish altis would tell us what's happening with his machine..... the suspense is killing me :)
|
Re: Our Dyson's died!
that probally blew up as well!!!!!!
|
Re: Our Dyson's died!
I have always been wary of Dysons.
I am sure that they are very advanced and technological but to me they scream Fischer Price.... Nuff said. |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Aha - now whoever thought of that invention must be raking it in - just from me alone! The number of times I've had an iron, vacuum cleaner or toaster etc pack up just as the guarantee expired........:cry: :D
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
I'm a Dyson convert... am on #2 now, after selling the DC01 to a friend. It's 7 years old now and still going strong. We've now gone for the smaller design instead of the upright one - think it's DC07, it's the animal one where the hose can be wrapped round the cylinder for storage.
I think Dyson gave the entire vacuum industry the kick up the arse that it needed. He deserves a :tu: just for that! As for the design, erm... ours isn't so bad. The 1st one was De Stijl, which was very funky, but at the end of the day it's all about whatever floats yer boat, and I like our new one - but I gotta say that Vax are just downright ugly, and Henry's are stoopid! |
Re: Our Dyson's died!
|
Re: Our Dyson's died!
Quote:
Of all the hoovers I think my favorites are the Hoover turbo power one or a hoover junior. They clean the carpet way better and are cheaper. Worst ones are electrolux they are just built so cheaply and the motors are cr@p. |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
I read somewhere that if a household nuys a Dyson, then the man is 54% (or something like that) more likely to do the hoovering.
|
Re: Our Dyson's died!
Kirby work extremely well and last forever ........
|
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
IN our house, if my wife buys a Dyson then the man is 100% more likely to wash/change the filters, because she does not understand the need to.
having an imitation on, she never ever changed the filters. only ever just emptied the box. I had to do all the filter cleaning. I do not want a Dyson thankyou. |
Re: Our Dyson's died!
Quote:
Vax are ugly (mine's bright orange - ugh), but on the other hand mine does work, and seems reliable. Unlike the Dyson, which I'll admit did look nice. Having said that, I didn't buy a vacuum to look nice. I bought it so it picked stuff up. The Vax does that, and it doesn't matter how it looks as when it's not being used, it's in a cupboard. And as for Henry's, well they do look stupid, but according to the cleaners at work, they are bloody reliable. |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
Quote:
It's not the Klixon (the 'thermal thingy') 'cos it's not klicked back on again. Yes they do use Torx screws and, although my TX10 driver is a little too small, it will just about do. There's only one screw visible from the outside (under the dust cylinder). And if you bend the wheels back there's two more screws just visible inside but I haven't taken these out yet 'cos they'll be a pain to get back in again. I can't help feeling that I need to get the wheels off first but, short of brute force, I can't see how to manage that. It must be well over 5 years old now and, since nothing has broken before, then I guess it doesn't really owe us anything. I just hate throwing stuff out :( |
Re: Our Dyson's died!
Quote:
|
Re: Our Dyson's died!
1 Attachment(s)
Quote:
My vax is gorgeous!!! |
Re: Our Dyson's died!
Mines sliver and cool. But I do sometimes miss me dyson!!!
|
Re: Our Dyson's died!
Quote:
Your's is nice. All the ones I saw when I was looking looked awful though. Still bought one. As I said, it picks stuff up, is more powerful than the Dyson and it seems more reliable too (not to mention cheaper), so I am more than happy. |
Re: Our Dyson's died!
My mother bought one of the upright dysons a few years ago, although it still works, I can't say I like it all that much
To noisy And god, the noise it makes when the rollers/brushes get stuck! jeesh Sounds like a machine gun going off |
Sorted!!!
Back from hols and a bit more time to look at it.
Yes indeed - getting the wheels off is the key to everything. Unfortunately, they won't just pull off - you first need to prise out the little (lime green in our case) plugs in the middle. I used a sharp screwdriver and I've made a right mess of them. Probably better to drill a hole in the centre, fit a screw, and pull on that instead. Then the wheels just pull off. There's 5 Torx screws holding the two halves of the case together and then everything else just unclips. The problem was a break in the live core of the flex. I bought some super floppy stuff to replace it and now we're back in action - whoopee! |
Re: Our Dyson's died!
cheap fix , good result :tu: :D :D
|
| All times are GMT. The time now is 15:12. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum