Help with remote + volume please =)
 

i seemed to have misplaced the little booklet telling me what code i needed to enter so that my blue "shark" remote would control telly features (volume etc) please could someone post the Codes for Samsung tellys. i tried looking everywhere....but couldn't find any on the net

thanks :)

Re: Help with remote + volume please =)
 

I have them uploaded on my webspace... http://homepage.ntlworld.com/richard...20codelist.gif

Re: Help with remote + volume please =)
 

thanks alot! :)

Re: Help with remote + volume please =)
 

Could I ask that this maybe put into the Knowledgebase about STB info as this question seems to get asked quite alot :)

Re: Help with remote + volume please =)
 

How exactly do we use those? :dunce:
..and which ones do what?

Re: Help with remote + volume please =)
 

Well thats perhaps something that could be added to the Knowledgebase.

You would require a new shark remote in either navy/grey (depending on STB and area). I'll see whay I can do for you :)

Re: Help with remote + volume please =)
 

I have a samsung remote in blue with rdc 002 written on the inside just below the batteries

Re: Help with remote + volume please =)
 

Ok... I'll tell you what to do and then I'll make sure it is available for everyone in the future :)

Bloody hell... can't find mine now!

I'll let you know soon

Re: Help with remote + volume please =)
 

Cheers m8. If it's any help the samsung is attached to a Sony CRT tv

Re: Help with remote + volume please =)
 

Right!

1. Make sure that the STB volume is at 10!
2. Press the * key and the setting key and keep them held down for two seconds. The Standy-By button should flash green twice
3. Type in the three digit code for your TV and press the select/ok key
4. The Stand-By button should flash green twice acknowledging the code has been accepted
5. Test the remote by holding down the * and Stand-By key down and if your TV goes into Stand-By you have the correct code.
6. If this code hasn't worked try the other codes listed for you manufacturer by repeating steps 2-5 until step 6 has worked

Hope this has helped Ramrod :)

Yours is a Sony so you will need to try the following codes:

316, 319, 322, 365, 366, 367, 368, 369 or 370

Re: Help with remote + volume please =)
 

Ermmmmm how do I get stb volume to 10? When I press vol on the blue samsung remote I just get a box on screen telling me to use the tv remote to adjust volume :dunce: :confused:

Re: Help with remote + volume please =)
 

Thats only necessary on Langley then, or it was with L2.9 software. Dunno whether or not it will be with L3.1 :)

Re: Help with remote + volume please =)
 

Sorry about this m8 but pressing the * and settings key doesn't do anything :confused:

Re: Help with remote + volume please =)
 

It should do. Make sure they are both held down together simultaneously for two seconds until that green light flashes :)

Just had to do it myself as the remote forgot the code - could have had something to do with the need for a change of batteries

Re: Help with remote + volume please =)
 

Nope.....this is on a samsung box innit?

Re: Help with remote + volume please =)
 

Right, Bob................the stb samsung remote controls volume&on/off standby mode and probably other stuff on the Sony tv now :tu:
Strange thing is that it accepted the 'programming' without any flashing standby lights etc..........but the main thing is that it did it :) :nworthy:
Cheers m8!
Someone rep the man for me please...............

Re: Help with remote + volume please =)
 

The PDF is now available giving step-by-step guides on how to programme the remote http://www.dtv.ukpcnet.co.uk/remoteguide.pdf

I will add a permanent link from the ntl:dtv site and it will also be available in my signature :)

Re: Help with remote + volume please =)
 

And this will be added to the Knowledgebase :D

Re: Help with remote + volume please =)
 

Article added
http://www.cableforum.co.uk/board/article.php?a=41