Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Problems installing XP on new computer... (https://www.cableforum.uk/board/showthread.php?t=15691)

bigitup_j 02-08-2004 17:15

Problems installing XP on new computer...
 
I have made myself a new computer. But, i can't seem to install XP

When it's installing onto my computer, is comes up with errors, such as DRIVER_IRQL_NOT_LESS_OR_EQUAL telling me to restart otherwise the computer will be damaged!
The installation will only get so far and then come up with a dark blue error screen.
I think it's the hard disk, because it's an old one.

Does anyone know what's the problem? What should i do?!

thanks very much :)

Neil 02-08-2004 17:17

Re: Problems installing XP on new computer...
 
Have you got another hard disk you could try?

paulyoung666 02-08-2004 17:21

Re: Problems installing XP on new computer...
 
have you tried fdisking the hdd ????????? , or maybe even getting a makers utility to flatten the hdd , i had to do that with my old maxtor :)

Paul K 02-08-2004 17:33

Re: Problems installing XP on new computer...
 
Had this problem one time due to the wrong type of IDE cable being used on the primary hard drive. You could try removing all but the necessary hardware (hard drive, CDROM etc) and see if it errors out again.

Richard M 02-08-2004 17:39

Re: Problems installing XP on new computer...
 
What's your spec, i.e. : mobo, memory, CPU graphics card.

Paul K 02-08-2004 17:40

Re: Problems installing XP on new computer...
 
Quote:

Originally Posted by bigitup_j
I have made myself a new computer. But, i can't seem to install XP

When it's installing onto my computer, is comes up with errors, such as DRIVER_IRQL_NOT_LESS_OR_EQUAL telling me to restart otherwise the computer will be damaged!
The installation will only get so far and then come up with a dark blue error screen.
I think it's the hard disk, because it's an old one.

Does anyone know what's the problem? What should i do?!

thanks very much :)

Can you run the process again with minimum hardware installed and if it errors out again can you write down the exact error message including the number as that will help us pinpoint the problem hardware for you :)

Millay 02-08-2004 17:45

Re: Problems installing XP on new computer...
 
Ive had this problem quite frequently with different machines I have been playing with.. I have always found it to be faulty memory, or dead fans..

You might wish to check those

homealone 02-08-2004 17:52

Re: Problems installing XP on new computer...
 
googling on the error message brings up several potential causes of this, many mention memory errors, but it seems to be a fairly generic error & may refer to

a faulty driver trying to access an inappropriate address

faulty ram stick

faulty page file - which may be caused by problems with the hard disk?

if you think it may be the hard drive, then you could try as paulyoung666, suggests, especially if you boot from the XP install cd & run the tools from there? (disclaimer here, is that I have 98se, still, so may not know my ar$e from my elbow ;) )

Otherwise have you another ram stick you can try, or like Neil said, another hard disk?

greencreeper 02-08-2004 17:52

Re: Problems installing XP on new computer...
 
http://www.microsoft.com/resources/d...d_stp_ottj.asp

If that's the error then I'd guess at it being a problem with the standard XP drivers and some piece of hardware. Given that you have an old HDD I'd blame that - XP + old hardware = nightmare It's the reason I haven't upgraded. Buy a new hard drive - probably going to be the easiest solution.

bigitup_j 02-08-2004 18:01

Re: Problems installing XP on new computer...
 
thanks for the info!
here's some info...
*CPU is AMD XP 2600+
*AGP NVidia 64mb (motherboard 8xAGP)
*Motherboard with nVidia nForce 2
*Crappy 10gb hard drive
*Biostar motherboard (supports AMD)
*512mb DDR RAM (233mhz, i think). Motherboard can support DDR400

i haven't got a spare hard disk. the fans are working ok (maybe the heatsink don't have enough of that conductive paste stuff (name?) on it for the processor.
the RAM is quite new.
the hdd is formatted for XP and the XP data is on the disk, but can't install the OS. it can just stop at any point!
i have only essencial hardware in the comp. i.e. cdrom, hdd, and apg graphics (need it, or can't plug in computer screen anywhere!)

hope that helps :)

bigitup_j 02-08-2004 18:03

Re: Problems installing XP on new computer...
 
i'm gonna buy a new hard drive tomorrow and try it.

some reps on the way for you peeps! :)

Neil 02-08-2004 18:08

Re: Problems installing XP on new computer...
 
The other thing to try is remove 1 thing at a time & retry booting, at least that may narrow it down for you. :)

bigitup_j 02-08-2004 18:11

Re: Problems installing XP on new computer...
 
i've already tried that. i took out the sound card, removed floppy drive, swapped over the RAM.
it's just the hard disk left... and it's old and rubbish, so XP probably don't like it! ruddy windows! :D

bigitup_j 03-08-2004 12:42

Re: Problems installing XP on new computer...
 
well, i tried a new hdd, but no luck! :(

i got an error 0x8E and windows website says it's a problem with the RAM! when i tried again, i got different error messages. but similar to what i had yesterday. (IRQL_NOT_LESS_OR_EQUAL) and windows says possible hardware problem.

so i'm going to have to try and find new RAM! but i'll keep my new hard disk (160gb on special offer! :D).

i'll let you know how i get on with new RAM...
or, if anyone knows anything else i could try, please post it. i tried all the suguestions above (thanks for those).
:)

Stuartbe 03-08-2004 12:50

Re: Problems installing XP on new computer...
 
As paul said - Make sure you are using high density IDE cables (80 core) between the motherboard and hdd.

Electrolyte01 03-08-2004 12:52

Re: Problems installing XP on new computer...
 
Problem with memory?

Try another memory stick if you have one, or if you have 2 or more, try taking the rest out and leaving 1 of them in. Repeat that until you get the error, then it will show you the damaged memory module :)

Stuartbe 03-08-2004 12:55

Re: Problems installing XP on new computer...
 
If you want to test the ram download this program - http://www.memtest86.com/

Run it on each stick of ram that you have until you find the problem one.....

BTW - What speed ram are you using ?

darkangel 03-08-2004 12:57

Re: Problems installing XP on new computer...
 
u can try http://www.memtest86.com/ to test the ram.
edit:- grrr stu got there first
what slots are u using the ram in nforce board can be v.picky on memory also what brand is it?

bigitup_j 03-08-2004 14:40

Re: Problems installing XP on new computer...
 
how can i test the ram though? it won't work with my main computer and the one i'm working on still needs XP to be installed.

the RAM details are:
Brand: Nanya
512mb DDR 266MHz - CL2

:)

and, i have no spare RAM.

Electrolyte01 03-08-2004 14:43

Re: Problems installing XP on new computer...
 
There's a DOS version I think that runs on a floppy or on CD.

darkangel 03-08-2004 14:44

Re: Problems installing XP on new computer...
 
Quote:

Originally Posted by bigitup_j
how can i test the ram though? it won't work with my main computer and the one i'm working on still needs XP to be installed.

the RAM details are:
Brand: Nanya
512mb DDR 266MHz - CL2

:)

and, i have no spare RAM.

memtest is standalone just d/l it and install to a floppy
edit:-ffs i really am gonna have to be quicker

Electrolyte01 03-08-2004 14:44

Re: Problems installing XP on new computer...
 
Or you can always try SeaTools, there's a memory tester with that and it will also scan your hard drive (not just SeaGate drives, but others too).

Electrolyte01 04-08-2004 09:51

Re: Problems installing XP on new computer...
 
I think I might need to do a check on my memory, sometimes when playing my game I get the SAME error message :erm:

dubaloo 04-08-2004 10:17

Re: Problems installing XP on new computer...
 
Quote:

Originally Posted by bigitup_j
thanks for the info!
here's some info...
*CPU is AMD XP 2600+
*AGP NVidia 64mb (motherboard 8xAGP)
*Motherboard with nVidia nForce 2
*Crappy 10gb hard drive
*Biostar motherboard (supports AMD)
*512mb DDR RAM (233mhz, i think). Motherboard can support DDR400 <snip>

Dosent the AMD 2600+ need at least 333Mhz ram to run?, You could drop the FSB speed to 100Mhz which will slow the CPU down, but at least you should be able to install XP untill you get a new stick..

jtwn 04-08-2004 11:36

Re: Problems installing XP on new computer...
 
Does it give a driver filename in the error?

bigitup_j 04-08-2004 17:01

Re: Problems installing XP on new computer...
 
no there's no drive filename on the error screen.

i think i change the RAM then...333mhz stick then...

:)


All times are GMT. The time now is 01:09.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum