Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   N force M/ Boards question (https://www.cableforum.uk/board/showthread.php?t=14718)

Paulie 12-07-2004 13:07

N force M/ Boards question
 
Hi all
I`m looking to upgrade my old mboard, and am looking at the nforce2 boards. Does anyone have one ? and can you rec` me any. I dont need all the bells and whistles. Also i`ve noticed that they seem to be a bit choosey with what ram is used. I`ve seen a sparkle one on ebay for £35 but can`t find any reviews, so all and any advice will be great.
Thanks in advance :)

ZrByte 12-07-2004 13:10

Re: N force M/ Boards question
 
Go with the Asus A7N8X or the MSI equivelant, by far the best available, solid as a rock with very few DOA motherboards.

I have the old version of the asus A7N8X and it is the most picky with RAM apparently, though I have never noticed this as I have used cheap n' Nasty generic RAM with no problems, however, I would reccomend buying Crucial or Samsung RAM from experience.

Paulie 12-07-2004 13:12

Re: N force M/ Boards question
 
Thanks for that, there are a few on good old ebay that i`m watching.

homealone 12-07-2004 13:18

Re: N force M/ Boards question
 
Hi Paulie

I use this one

http://www.biostar.com.tw/products/m...hp3?name=M7NCD

nothing really stellar to report, but it seems to do the job ok with an Athlon xp2600 & DDR400 Ram - don't really know how it compares with the Asus, though. :)

Richard M 12-07-2004 13:20

Re: N force M/ Boards question
 
I have the Asus A7N8X-E Deluxe shown on this page:
http://www.overclockers.co.uk/acatal...herboards.html
It's probably the best board you can buy for an Athlon XP, only £66 inc. VAT too! :)

Bifta 12-07-2004 14:38

Re: N force M/ Boards question
 
Quote:

Originally Posted by Richard M
I have the Asus A7N8X-E Deluxe shown on this page:
http://www.overclockers.co.uk/acatal...herboards.html
It's probably the best board you can buy for an Athlon XP, only £66 inc. VAT too! :)

I have exactly the same motherboard, can't fault it.

dd2k 12-07-2004 14:53

Re: N force M/ Boards question
 
I have the MSI K7N2-Delta ILSR, its great board. loeads of features, recomend it to anyone

Stu038 12-07-2004 15:08

Re: N force M/ Boards question
 
Quote:

Originally Posted by Richard M
I have the Asus A7N8X-E Deluxe shown on this page:
http://www.overclockers.co.uk/acatal...herboards.html
It's probably the best board you can buy for an Athlon XP, only £66 inc. VAT too! :)

Got one as well and only one niggle with it.
Since installing it, XP reckons that my CDRW and DVD drives are SCSI and that shortcuts for them on the desktop don't seem to work. Buts thats probably me being :dunce: though :)

Bifta 12-07-2004 15:11

Re: N force M/ Boards question
 
Quote:

Originally Posted by Stu038
Got one as well and only one niggle with it.
Since installing it, XP reckons that my CDRW and DVD drives are SCSI and that shortcuts for them on the desktop don't seem to work. Buts thats probably me being :dunce: though :)

I'm using one under XP Pro and it say's my DVD writer is an NEC ND-1300A and the DVD Rom is a Generic IDE DVD rom, did you install the latest Nforce drivers?

Stu038 12-07-2004 15:23

Re: N force M/ Boards question
 
Quote:

Originally Posted by Bifta
I'm using one under XP Pro and it say's my DVD writer is an NEC ND-1300A and the DVD Rom is a Generic IDE DVD rom, did you install the latest Nforce drivers?

Bios update yes, but not the drivers as when I looked some time back there wern't any. Besides you know what its like, they work perfectly ok other than that, so after a couple of days the minor inconvinience becomes the norm and you don't notice it anymore ;)

I suppose I ought to have a look again tonight

SMHarman 12-07-2004 15:51

Re: N force M/ Boards question
 
My main PC has an ASUS - was supposed to be the Asus A7V333R ATX 200/266 fsb Raid Motherboard but got replaced with the upgraded version. Does its job as well as can be.

Bifta 12-07-2004 16:04

Re: N force M/ Boards question
 
Quote:

Originally Posted by Stu038
Bios update yes, but not the drivers as when I looked some time back there wern't any. Besides you know what its like, they work perfectly ok other than that, so after a couple of days the minor inconvinience becomes the norm and you don't notice it anymore ;)

I suppose I ought to have a look again tonight

Nforce motherboard drivers came out along with the first Nforce boards, you should have at least installed the IDE driver (which is part of the intall) when you installed the motherboard, if I were you I'd download the latest ones from here:

http://www.nvidia.com/object/nforce_udp_winxp_4.24

Stu038 12-07-2004 16:17

Re: N force M/ Boards question
 
Quote:

Originally Posted by Bifta
Nforce motherboard drivers came out along with the first Nforce boards, you should have at least installed the IDE driver (which is part of the intall) when you installed the motherboard, if I were you I'd download the latest ones from here:

http://www.nvidia.com/object/nforce_udp_winxp_4.24

Thanks for the link mate, irrc the IDE driver I'm using currently is 2.somthing. I'll download that pack when I get home tonight.

Paulie 12-07-2004 23:32

Re: N force M/ Boards question
 
Thanks alot for the input guys. Looks liks it`s gonna be Asus then.

Nutty 13-07-2004 12:12

Re: N force M/ Boards question
 
I have an Abit NF7-S version 2, probably the best overclocking nforce2 board you can get. Very happy with it.

Stu038 13-07-2004 12:33

Re: N force M/ Boards question
 
Quote:

Originally Posted by Bifta
Nforce motherboard drivers came out along with the first Nforce boards, you should have at least installed the IDE driver (which is part of the intall) when you installed the motherboard, if I were you I'd download the latest ones from here:

http://www.nvidia.com/object/nforce_udp_winxp_4.24

Downloaded and installed last night and got half a result, XP Pro is at least reporting the drives correctly now but I still can't get a shortcut to them to last on the desktop beyond a reboot.
Its just occurred to me that it may be down to a bios setting though, If I've still got the bios set to discover them on boot instead of having them fixed would that cause the problem? They would effectively be new devices every boot up. I'll have a nose at that tonight.

swoop101 13-07-2004 12:44

Re: N force M/ Boards question
 
I use an MSI K7N2 Delta L
give great eprformance with Dual Bank memory, steady as a rock.

MSI auto update stuff is great as well, update Bios with no sweat. :D

Bifta 13-07-2004 13:05

Re: N force M/ Boards question
 
Quote:

Originally Posted by Stu038
Downloaded and installed last night and got half a result, XP Pro is at least reporting the drives correctly now but I still can't get a shortcut to them to last on the desktop beyond a reboot.
Its just occurred to me that it may be down to a bios setting though, If I've still got the bios set to discover them on boot instead of having them fixed would that cause the problem? They would effectively be new devices every boot up. I'll have a nose at that tonight.

Mine are set to auto detect, I can just go into windows explorer, open My Computer and drag the relevant drive to the desktop to create a shortcut.

Stu038 13-07-2004 13:47

Re: N force M/ Boards question
 
Quote:

Originally Posted by Bifta
Mine are set to auto detect, I can just go into windows explorer, open My Computer and drag the relevant drive to the desktop to create a shortcut.

I'm sure mine are as well, which is why I'll have a try at "fixing" them tonight.

It dosn't seem to matter how I create the shortcuts, they work fine until I reboot or log off, then either left or right clicking on them brings up the standard shortcut invalid message with the option to browse for the file. All of which takes longer than reaching across and pressing the eject/open button on the front of the damn things ;)

How have you got yours configured?
I've got them set as slave on each channel with my hdd's set as master

swoop101 13-07-2004 14:03

Re: N force M/ Boards question
 
I have my HDD's on one channel master/slave
and CDRW DVD on second channel master/slave
that way the HDD will run at a faster speed.

Bifta 13-07-2004 14:06

Re: N force M/ Boards question
 
Quote:

Originally Posted by Stu038
I'm sure mine are as well, which is why I'll have a try at "fixing" them tonight.

It dosn't seem to matter how I create the shortcuts, they work fine until I reboot or log off, then either left or right clicking on them brings up the standard shortcut invalid message with the option to browse for the file. All of which takes longer than reaching across and pressing the eject/open button on the front of the damn things ;)

How have you got yours configured?
I've got them set as slave on each channel with my hdd's set as master

HDD1 - Primary Master
HDD2 - Primary Slave
HDD3 - Sata Channel 1
HDD4 - Sata Channel 2
DVD-Rom - Secondary Master
DVD-RW - Secondary Slave

Stu038 13-07-2004 15:57

Re: N force M/ Boards question
 
Quote:

Originally Posted by Bifta
DVD-Rom - Secondary Master
DVD-RW - Secondary Slave

Used to have mine both on the same channel a while back but I found I got less write errors when backing up <cough> disks on the fly after I seperated them.

Have to experiment again I think

swoop101 13-07-2004 17:33

Re: N force M/ Boards question
 
Quote:

Originally Posted by Stu038
Used to have mine both on the same channel a while back but I found I got less write errors when backing up <cough> disks on the fly after I seperated them.

Have to experiment again I think

If you want to copy on the fly then I would get a pci IDE card to run one from that.

secular 14-07-2004 13:48

Re: N force M/ Boards question
 
Stu038 - get to go - http://www.nforcershq.com/forum/
New drivers, Bios update links, everything you need.

ABIT > ASUS ;)

ZrByte 14-07-2004 16:41

Re: N force M/ Boards question
 
Quote:

Originally Posted by secular
Stu038 - get to go - http://www.nforcershq.com/forum/
New drivers, Bios update links, everything you need.

ABIT > ASUS ;)

Ahem


Abit < Asus
;)


All times are GMT. The time now is 03:35.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum